SR22T - Actual Trim position can't be seen as it should

Bug Reporting Hub Aircraft & Systems
, , , ,
1

:wave: Thank you for using the Bug section, using templates provided will greatly help the team reproducing the issue and ease the process of fixing it.

2 tags are required: One for platform, and one for aircraft.

Are you using Developer Mode or made changes in it?

NO

Have you disabled/removed all your mods and addons? If the issue still occurs with no mods and add-ons, please continue to report your issue. If not, please move this post to the Community Support section.

YES

Which aircraft are you reporting an issue about? (Please also add the proper tag for it)

sr22t

Which aircraft version are you experiencing this issue on? (You can find this listed in the Content Manager under the Aircraft Name)

0.2.13
Brief description of the issue:
In a Cirrus SR22, the trim position is showed on the stick itself where it is graduated from Down–TO–UP. It is the only way to know how trimmed this airplane is. Unfortunately it always shows TO even if it is full down or full up. That’s a real issue when it comes to taking off because we have no clue and it will result in a crash at take off if that trim is too off of what we expect.

Provide Screenshot(s)/video(s) of the issue encountered:

Microsoft Flight Simulator Screenshot 2023.12.11 - 12.56.48.00
Microsoft Flight Simulator Screenshot 2023.12.11 - 12.56.48.001920×1080 55.2 KB

Detailed steps to reproduce the issue encountered:

just to use the electric trim to see nothing is moving

PC specs and/or peripheral set up if relevant:

Build Version # when you first started experiencing this issue:

SU14 v1.35.21.0

:loudspeaker: For anyone who wants to contribute on this issue, Click on the button below to use this template:

Do you have the same issue if you follow the OP’s steps to reproduce it?

Provide extra information to complete the original description of the issue:

If relevant, provide additional screenshots/video:

3

Until it’s fixed, use the HUD to see the trim. Not ideal, but it’s the only way ATM. Voted.

1 Like
4

Yes I know thx anyway for your vote.

You’re right, activate the realism breaker HUD is the only solution at the moment because even the elevator doesn’t move at all. And it should because this aircraft has no trim tab on the elevator. It’s the entire elevator that must move to act as a trim.

Hoping that just few votes will knock at Asobo door.

1 Like
5

Do you have the same issue if you follow the OP’s steps to reproduce it?

Yes I do have it

Provide extra information to complete the original description of the issue:

Not much to say. Trim position can only be know by using external view HUD

If relevant, provide additional screenshots/video:

Not necessary

1 Like
6

Do you have the same issue if you follow the OP’s steps to reproduce it?

Yes, same issue here.

Provide extra information to complete the original description of the issue:

Not being able to trim the aircraft properly is unacceptable.

If relevant, provide additional screenshots/video:

1 Like
7

FYI, this issue is resolved in SU15 Beta.; the stick visually moves according to trim input.

3 Likes
8

That’s interesting. So the virtual stick and the joystick are out if sync since the joystick doesn’t move when trimming?!?

9

For an additional kicker, the trim wheel on the VelocityOne yoke is reversed in the SR22. That was a fun one to figure out with no visual reference for the trim position.

2 Likes
10

Indeed but not important because it is the center position which is moving so the feel reflect the real thing.

1 Like
11

The TRIM position is now displayed on the stick in response to pilot input. Should this entry be closed?
Regards.

1 Like