TBM 930 unclearable warnings

Bug Reporting Hub Aircraft & Systems
, , ,
1

Are you using Developer Mode or made changes in it?

No

Have you disabled/removed all your mods and addons?

Yes

Brief description of the issue:

Pitot heat and stall heat warning is always on. It actually seems that those 2 systems don’t work. If you do a cold start AUTO SEL will also stay on

Screenshot of issue:

Microsoft Flight Simulator 20_08_2022 17_19_09
Microsoft Flight Simulator 20_08_2022 17_19_091920Ă—1080 144 KB

Build Version # when you first started experiencing this issue:

1.26.5.0

:loudspeaker: For anyone who wants to contribute on this issue, Click on the button below to use this template:

Do you have the same issue if you follow the OP’s steps to reproduce it?

Provide extra information to complete the original description of the issue:

If relevant, provide additional screenshots/video:

2

These all work fine here. Turning on the pitot and stall heat switches clears them. Auto sel is toggled by the corresponding overhead switch.

3

A couple of things here.

  1. From the screenshot, the latest TBM performance improvements may not installed also the latest G3000 is not installed
  2. The pitot switches are selected ON. Chek that there is not another binding attached to that function that’s selecting them off but not turning .
  3. the autoselect is selected on the overhead panel toggle switch.
4
  1. What do you mean by latest TBM/G3000 improvements? That’s the stock Asobo TBM and MSFS is updated to latest
  2. Pitot switches are not bound to anything, I turn them on/off by clicking on the panel
  3. Autoselect is selected on overhead panel. Not seen on this screenshot because I used hot start (start from runway) to make it. The autoselect bug appears only for cold starts
5

The performance mod shouldn’t make the difference because I un-installed the mod due to issues and this all works fine. The G3000 mod could be a factor though. Just like with the G1000 in the sim the G3000 has also had some work done to it to improve its behaviour. They are working on improving it further so we will see even more benefit from it in the future. For now if you are on PC, I would recommend you install the latest Working Title G3000 mod and see what it’s like after that.

If you are on Xbox you will be out of luck until the mod version replaces the default sim version at some point in the future.

6

Same issue with WT G3000

Microsoft Flight Simulator 22_08_2022 18_39_49
Microsoft Flight Simulator 22_08_2022 18_39_491920Ă—1080 159 KB

7

Do you have a Honeycomb yoke or another controller that may be setting the pitot heat to off somehow. If not try clearing the community folder of everything other than the G3000 mod, restart the sim an check again.