pc
Store Version
Dev Mode off no changes or customizations
In the TBM 930 When using the Mouse to move the Throttle from Hi Idle to Flight Idle the Sim actually places the Prop in BETA state (just aft of the normal flight idle position). This is not the normal position. In reality the pilot must lift the locks to move the throttle back aft of Flight idle position. Normal ground handling for the TBM is NOT to run in BETA on the ground except for ground handling procedures such as regulating taxi speed.
Steps to reproduce
Load the TBM Cold and Dark.
Start the engine and Move up to High Idle throttle position.
Using the Mouse + Left Button Hold Click the right mouse button.
The Throttle lever will move to the left hand side into power/flight side then down into what is Beta (0 deg pitch).
Expected Behavior:
The Throttle should simply move left into flight idle position as it did in SU6 (previous version).
Version under test 1.13.21.0
System Config:
Intel Core I9 10850 @3.60 Ghz
32GB DDR 4 @ 3600
Nvidia RTX2080Ti
M2 Samsung EVO980PRO 1TB