You’ve done amazing work for so many aircraft in MSFS that I personally have no issue with paying a small premium for earlier access. However, this pay model will not integrate with your excellent toolbar app in MSFS that has all your checklists, right? Assuming that’s correct, that’s really disappointing to me as I find your toolbar to be absolutely essential for flying these days.
1 Like
The Checklists will always be in my toolbar mod from day one. So the MD-11 is already in.
Cheers
2 Likes
1.0.7 update is out!
Change log:
- ADDED - Realistic parking brake engagement logic and option
- ADDED - Altimeter sync setting and functionality
- ADDED - AILERON DEFLECT OVRD code (button does not yet function)
- FIXED - T/O THRUST activating with ATS off
- FIXED - RCWS causing permanent outboard aileron lockout
- FIXED - PROF TO not showing in meters when meters are selected
- FIXED - (P3D) Default GPWS conflict
- FIXED - VS/FPA button in P3D
- FIXED - Lack of fuel not causing engines to flame out
- FIXED - Lack of fuel not causing APU to flameout
- FIXED - Edge case crash in CAWS system caused by ADC power loss
- FIXED - Spoiler toggle event only extending spoiler
- FIXED - Engine start possible without air source
- FIXED - Invalid RTE RSV FUEl entry when entered by weight
- FIXED - VOR/ADF needles instantly snapping to values
- FIXED - Canadian altimeter setting in MSFS EFB
- FIXED - Missing FD1/FD2 annunciation on PFD
- FIXED - CAWS alert power requirements
- FIXED - MASTER WARNING/MASTER CAUTION/SD cue lights activating without DEU power
- FIXED - ABS DISARM light not coming on when initially selecting AUTOBRAKE TO
- FIXED - Windshield wiper INT behavior
- FIXED - Windshield wiper timing
- FIXED - AP heading bug not following aircraft heading on ground
- FIXED - Brake behavior and baro sync options not being retained properly
- FIXED - P3D EFB maximum fuel value not matching
- FIXED - AUTOPILOT alert not playing on startup
- FIXED - EVAC switch behavior with respect to the guard
- FIXED - GPWS OVRD switch/guard not playing sound
- FIXED - EVAC switch/guard not playing sound
- FIXED - (P3D) EFB not applying DEFLECTED AILERON setting
- FIXED - Horizontal alignment of vertical FMA
- FIXED - Pitch stability and pitch trim flight performance
- FIXED - ER buttons not animating
- FIXED - Chocks preventing brake actuation
- FIXED - PIP pylons not working
- FIXED - Wingflex-related visual issue
- FIXED - Gear handle release button not working
- FIXED - Deflected aileron button not working
- FIXED - Backward strobe lights
- FIXED - Missing wingtip nav light
- FIXED - Missing strobe ground flash
- FIXED - Deflected aileron override button appearing with option disabled
- FIXED - Gear handle animation
- FIXED - Strobe timing
- FIXED - (P3D) Hoppie code not displaying after saving
- FIXED - Avionics fan starting without A/C power
- FIXED - Oil pressure alert during startup
- FIXED - Cabin lighting brightness
- FIXED - MIN PROF not being reset by changing approach
- FIXED - A scenario causing v-speeds to be reset
- CHANGED - Included current panel states
- CHANGED - Changed TCAS altitude calculation to attempt to resolve erroneous altitude reporting
- CHANGED - Improved display startup timing
- CHANGED - Certain EFB settings saving to the airframe instead of user settings
9 Likes
I only did 1 flight with the update, but it failed to keep the AP engaged when capturing the ILS into KSDF 35L. It was a bit bumpy and windy, but nothing it shouldn’t be able to handle. This wasn’t the case before the update. Also, can’t hide the yokes still.
Do they plan to make that yoke hiding possible? That would be nice.
I’ve also done one flight with the 1.0.7 update and it behaved on ILS (EDDP 08L) as expected.
I literally just did the same flight into SDF for 35L. Bumpy and windy for sure, but no disconnects.
I just did a full uninstall and reinstall of the md11, will test when Microsoft Xbox services are back online
Hey, you’ve got a store now! Congrats!
1 Like
I finally got to check out this plane in VR. The sky simulations MD-11 is better looking than this.
It looks really worn in the inside, and looks like someone changed their oil in car and then touched all over the overhead with dirty grease covered hands.
Outside model looks worse too..
Amazing the skysim one took so much flak that this awesome one from TFDI was coming out, what a joke… Even the systems seem bad… Glad my buddy tossed his cash in the trashcan, I dodged getting ripped off. I would never want to fly this in its current state.
4 Likes
May I ask is there another way to handle the knobs instead of doing it with the mousewheel on it? A hand abpears and then I have to rotate the mousewheel. Are there no contrails at 360 feet? And why do I hear almost nothing in the cabin and outside there is a hurricaine?
Thanks
1 Like
I sure hope they fix the throttle problem with throttles constantly moving back and forth while flying…speed up..slow down…speed up..etc
2 Likes
That’s terrible, you are right. I use AxisAndOhs appl+Behringer mini X-touch and it works perfectly. Search this combo 
This never happened to me. Check bindings maybe?
Thanks… I will look into it.
Yes it happens, only when I am ascending or decending doesn’t.
I see FF is rangeing from 2000 to 2700 kgph.
Blast why can I not hear the sounds in the cocpit? I cannot hear Betty… in every other aircraft no problemo… I am a little bit sad.
Great! The latest update seems to have fixed some weirdness with sids and stars.
Jikes… I suppose I did not uninstall the MD 11 with the MD11 Install Manager… I deleted it…and now I had to uninstall the 1.07 version and install it again… and now I can hear Betty.
Hi, I had problems to load a flight at KMEM with MD-11F. Noticed that if I start with a default plane and next with MD-11 it loads. Can anybody confirm?
Thanks
I filled and activated secondary flightplan and it worked fine