I recently bought the TM Boeing yoke/throttle combo. Impressed with the yoke, the quadrant has been a real pain though. I downloaded the drivers, plugged it in and the rotary switch seemed faulty - it was sending continuous signals for several buttons. I rolled back drivers, tried reboots, different…

Thanks for this, just as a correction, its top right button not bottom right :slight_smile:, so hold top left and top right at same time to exit calibration. But you are correct, why this is not in the support docs or the manual is beyond me.

Thanks for that - you are absolutely right. I’ve updated my post just in case someone skims by and doesn’t read on. Cheers!

hello, where did you do this? in game or in de calibration app? because i have a probleme that the throttle quadrant dont have the funtions that it should have

Pressing a button while plugging in the USB cable sounds like calibration utility programmed into device itself, so it should work provided you have powered on PC in which to plug it.

Help! I’ve tried the recalibration steps in the OP post and axis y and z (2nd and 3rd levers) are still not aligned. I can’t be believe TM has nothing in the user manual about how to calibrate. It is a non-starter because e.g. the alignment is so bad that if the levers are in the same position then…

And here is the same situation [PXL_20220911_174309699.MP] the TM control panel (firmware is up to date)

Another user posted on similar issue recently ( TCA Quadrant still not callibrating fully ) with the problem apparently being a broken button on the throttle that prevented correct calibration procedure. Edit: Er, never mind, different TM throttle. That being said, are your top three buttons working …

[image] PANTSZER: That being said, are your top three buttons working correctly? If they aren’t then the calibration operation would probably not work correctly. Thanks for your post. I confirm that calibration definitely operates as posted by the OP, it just isn’t calibrating correctly. I ju…

Also try calibrating it in Windows. Just type joy.cpl into the search box and find the settings tab for the controller you need, run through the calibration routine there.

Thrustmaster Boeing Throttle Quadrant Calibration

User Support Hub Hardware & Peripherals

beaufortuk September 11, 2022, 5:43pm 8

And here is the same situation

the TM control panel (firmware is up to date)