Downloaded and installed latest driver from Thrustmaster. This item is listed in the approved peripheral list for MSFS 2020. Yet, it shows up with a big question mark and I can’t use it or set commands. Nada!
By the way, the peripheral is listed as under controls as a “T.FLIGHT HOTAS PS3” The Description box has a greyed out image with no details and a big question mark.
Anyone have a solution??
Many Thanks!!
+1 Same Problem with a ch produkt combatstick.
Had this issue during alpha. Make sure the switch on your stick is set to PC, not PS3. The switch is on the back of the stick section. Will probably have to quit FS and re-load. Hope that works for you.
Same problem…
WOW! that was the solution. If you was here and there weren’t no Covid19, I’d probably give you a big hug!! Many thanks!!
Mine has this issue where the throttle is reversed (all the way up is slow down and all the day down is speed up) shouldnt be a problem because there is a reverse this axis button in the settings however for some reason it doesnt work post saving and coming back into the settings.
Anyone with a Hotas X run into this problem?
Here was the solution that worked for me!!
same for me - reversed throttle, invert axis does not work - after save, throttle is reversed again. Any idea how to make full throttle all the way up?
I had similar issue. I figured the throttle was off if there was no white line and with full throttle, you’d have a full white line…I was wrong!
With throttle in closed position (all the way back) and a full white line, my throttle is at lowest position. In full open position (all the way forward) there is no white line showing.
Hope this helps!!
Same here. CH 568 COMBATSTICK shows up, but with a BIG “?” on the image.
Sorry, I know absolutely nothing about that controller! If it is on the “recommended” list, it should work. My issue was simply a switch I had set wrong.
Best of luck!!
Same for me: notified Alpha ASOBO and T.MASTER nothing solution
For auto binding to take place try the Hotas X in green mode… Button in the middle
Has anyone an idea why my T Flight Hotas X is not giving full throttle in the sim? I have to assign a button to get full throttle, i have to push the button when my throttle is all the way forward then it is giving full power. I already tried to set it back to standart but that didn´t work out.