Training Stuck After View RPM

User Support Hub User Interface & Activities
, , , ,
1

ISSUE DESCRIPTION

In first training lesson in Cessna 172, it won’t advance after instructor asks to look at RPM indicator in PFD. It is requested to do so by using SHIFT+[arrow keys]. I have used all the keys to reposition the view, zoomed in on the RPM gauge and waited 5 minutes, then reset the view to default pilot view, waited 10 minutes but nothing ever happens. Restarted this lesson and the same problem occurrs.

If applicable, which aircraft is experiencing this issue:
C172 in Training

[PC Only] Did you remove all your community mods/add-ons? If yes, are you still experiencing the issue?
Yes

FREQUENCY OF ISSUE

How often does this occur for you (Example: Just once, every time on sim load, intermittently)?
Always

REPRODUCTION STEPS

Please list clear steps you took in order to help our test team reproduce the same issue:

  1. Go to basic training.
  2. Advance through first one or two stages until you get to the throttle lesson.
  3. Look at RPM gauge by using keys as requested.
  4. Wait to see if anything happens.

YOUR SETTINGS.

Keyboard and joysticks for yoke and throttle+rudder

[PC Only] Are you using Developer Mode or have you made any changes to it?
No

[PC, MSFS 2020 Only] Are you using DX11 or DX12?

[PC Only] What GPU (Graphics Card) do you use?
RTX 3050

[PC Only] What other relevant PC specs can you share?

MEDIA

Please add a screenshot or video of the issue occurring.

[END OF FIRST USER REPORT]

:loudspeaker: For anyone who wants to contribute on this issue, Click on the button below to use this template:

Do you have the same issue if you follow the OP’s steps to reproduce it?
•

Provide extra information to complete the original description of the issue:
•

If relevant, provide additional screenshots/video:
•

2

I had the same - the trick is to use the arrows or mouse (right click and move) to place the blue highlighted panel dead centre of the screen.

1 Like
3

Problem has magically been resolved. Not sure if I did anything or Asobo fixed it.
•

4

Moved to User Support Hub User Interface & Activities since a solution has been marked.

5

Do you have the same issue if you follow the OP’s steps to reproduce it?
•

Provide extra information to complete the original description of the issue:
•

If relevant, provide additional screenshots/video:
•

6

Having same issue and it has not magically been fixed. Its asking a ridiculous question using incorrect control inputs. Will not allow further progress.

1 Like
7

Yes. For me, the view of the RPM indicator needs to be in the center horizontally, but in the upper third of the screen vertically. Also applies to the airspeed, altimeter, as well as the analog gauges.