How to build the path to runway which has one taxiway junction at middle of runway? For example, USII airport. How to make AI aircraft turn to runway, taxi to the end of runway, make a U-turn at the end and have a take-off? Default settings doesn’t have a “normal” AI operation at USII. All take-o…

Solved here: [image] How to build a back-taxi? SDK There is no chance to build a back-taxi routes in MSFS. For example, runway has only one taxiway connected in the middle of the runway. For take-off the AI aircraft need to go to runway, get taxiing on runway to the end,…

let me see if i understand what you want to do is a backtrack? (term used in aviation.)

I saw that at your airport and a big backtrack, but come on, I’ll try to explain it in a way with images. At the airport that I created my backtrack is smaller than yours but the concept is the same. [FlightSimulator_2020_10_22_19_45_57_886] yellow lines: create taxiways with runway ownership. P…

Hi. I also encountered an AI problem on the lanes where the TAXIWAY is almost in the middle of THE runway of the UWKJ airfield, I did not understand the instructions a Little (the planes began to taxi to the ends and take off, but only from one end, in my case 16 or 34. Hence the question. from the …

I didn’ understand your fifth and sixth images. When you turn from taxiway to runway, where your path merge the runway? Should it goes as a separate path all the way down to the end of runway to make a U-turn? Or you merge the runway somewhere and this is enough for AI to continue on runway till t…

At first, the AI took off from RW34 and when the wind changed, they did not want to take off from RW16, Then they managed to launch the AI from RW16 and when the wind changed, they stopped taking off from RW34. At the junction of the runway and the RD, I tried to do the direction of the RD as runway…

[image] Jamilzeira82: Always tip: develop, compile and test, to get this backtrack in my scenario it took many hours to open and close the sim (alt + f4 hehehe) Did try your taxi paths - doesn’t help. Also tried other thousands - result is the same :disappointed: Alt+F4 is my favourite comm…

you put HOLDSHORT no draw ?in point da taxiway. the hold short command without the draw they do not obey and enter the track without the atc authorizing

Yes, but even so, they doesn’t reach this HOLDSHORT point and turns around on the first merge point between RUNWAY path and TAXI path on the end of the runway.

Unable to build the path for runway with one taxiway joint

User Support Hub SDK

Taurus330 November 10, 2020, 7:15pm 11

Solved here: