I am running a Windows 10 PC with MSFS 2020.
I have the latest firmware installed on the VF1 (14.0)
Input mode is set to PC.
Controls work normally for jets using the commercial aircraft throttle controls, although I have not been able to calibrate them in the FBW A320NX as yet.
When switching to GA Aircraft, I only get partial throttle on using the GA controls. (The Axis only moves a quarter on the screen but full physical movement on the actual control)
I have checked that there is no conflict of mapping in MSFS control settings.
I have tried to re map the throttle controls for GA aircraft and get a message “Unable to set a control on a device that is not detected”, yet when I flick back to Jets, it works fine.
I have checked all cables and tried other cables to eliminate this as a fault.
I did note that this problem occurred after recent MSFS Update 11, so assume it is a compatibility issue.
I would appreciate any help you can give to resolve this.
Be sure you also calibrate in Windows. I think if you search settings for game controllers there is a Windows app to help calibrate, then go into the game and check the axes in the Controls menu give you full deflection.
2 Likes
Many thanks for your suggestion. This solved the issue for me.
Some niggling issues with rudder axis but it is all working again.
It was working fine prior to latest MSFS update so the calibration must have altered after the update.
Something to watch out for next time.
Again, thank you so much for your help.