Okay,.I’ll try that. Thanks for the tip.
Hello,
thank you devs for this product and work, it’s perfect! Really appreciated your work, it’s working perfectly to me and swap default G3000 on my sim. Great work!
Hello,
First of all I would like to say I like this mod very very much. It really makes MSFS more immersive and better to plan/fly oceanic in the Longitude!
I noticed that the FMS doesn’t switch to the next waypoint when I fly over them. The FMS does change the course and it follows the preplanned route perfectly. But, the ETE, ETA and fuel calculations are wrong. For example: When I cross 53/30N and 52/30N is next, the FMS sticks to the 53/30N waypoint. This results in the ETA, ETA an fuel calculations adding up (the expected time until next waypoint at the top of the screen counts up as time passes, instead of counting down). The only workaround is writing down the ETE, ETA an fuel calculation of the next waypoint when passing over the previous waypoint. Is this a know bug, or is it on my side?
Also, when I open the flightplan page, the FMS comes up with the message “Warning: Active flight plan is desynchronized. Please delete the active plan to resolve”. Deleting the FP and replanning the whole route doesn’t solve this issue. I’m wondering if this has something to do with the issue I described above?
Any ideas or tips? Thanks!
Best regards, Stefan
The desynch warning seems to be related to a combination of waypoints. I find not using or changing one when re-entering the plan often works.
I cannot workout why though!
Also seems to happen in New Zealand a lot, though this may be a coincidence.
Richard
Is vnav working in WT G3000?
1 Like
Advisory only.
What does advisory only mean? Did I do something wrong?
It means it doesn’t move the plane, it just shows you a marker of what you should be aiming for.
1 Like
Does VNAV work in the WT TBM 930? By that, I mean, does it take the plane to the VNAV alt automatically, or do you have to fly it down?
1 Like
this question:
is answered by:
3 Likes
Hello,
I hadn’t used FS2020 for a while.
I used the TBM930 Improvement Mod
I used the WT G3000
And TCAS was working before
I did the updates of Fs2020
And install the last version of WT for the G3000 and I also added the 2 following lines because they are not available by default with the last version of WT G3000
But the Traffic is not available anymore, I don’t know what’s going on, I saw that you have to put the transponder on TA only but I don’t see it in the transponder mode
If someone would be kind enough to help me?
Thanks
Right now it is an advisory VNAV, meaning to have to fly it down using the advised VS.
Where is the advisory VS displayed?
Thanks
Magenta caret (arrow) on the PFD altitude tape, assuming you’re on a leg that has an advisory altitude.
Thank you so much
So out of nowhere now the WT G3000 in my Mugz modded TBM freezes the GPS display so it looks like my plane is going nowhere. The external map works fine and I can make ILS landings and such.
It’s unusual because I’ve done nothing recent to change anything and out of the blue it’s happened twice in a row. Several times it seemed to unfreeze if I set the display to maybe 1nm or even lower but stayed stuck eventually no matter how things were set.
WT G3000 v0.76 (newest)
Mugs TBM Mod v0.6.2 (newest)
Anyone else experiencing this now or recently?
no problems…
it works normally for me (except the broken thing of SU7: weather radar and rain/ice visual in VR)
I’ve had this exact issue randomly since SU7. I’m also using WT G3000 v0.7.6 but am not running the Mugs TBM Mod. Some flights there’s no issue at all, others it can freeze at any stage of the flight.
I’ve seen random previous posts from quite a way back on this issue. First time I’ve had it happen yesterday (two times in a row) and I’ve been flying with the WT G3000 for a while. Just seemed to happen out of nowhere.
We’ll see what happens today I guess