ISSUE DESCRIPTION
Description of the issue:
The noseline and bowlines are missing.
Expected behavior (real aircraft):
The Zeppelin NT has four handling lines attached to the nose section of the envelope:
- Noseline
- Backup noseline
- Left bowline
- Right bowline
The Noseline: its’ function is to connect the airship to the mast via the mooring winch during masting operations.
During flight, the noseline remains attached and hangs freely below the nose of the envelope. Its movement reflects the behavior of the airship and the surrounding airflow:
- In hover or very low-speed flight, the noseline hangs vertically downward.
- In steady forward flight, the noseline hangs in a stable position slightly angled backwards toward the gondola due to the airflow (relative wind) acting on the line.
- During turns, the noseline moves and swings due to the change in airship motion and inertia.
- In wind or turbulence, it moves noticeably as the airship responds to atmospheric conditions.
The noseline is a unique and highly visible part of Zeppelin NT operations. It is always visible to the pilot and provides a direct visual connection to the airship’s movement and environment. Watching the line react to turns, wind, turbulence, and changes in flight condition is a distinctive part of the airship experience and something that is fundamentally different from operating a fixed-wing aircraft or helicopter.
The other three lines are attached to the forward section of the gondola and are released when required during ground operations. They also move in response to airship motion, although their movement is generally less pronounced than the noseline.
Here’s a video where the lines are visible (starting 23:48):
Current behavior in the simulator:
All four handling lines are completely missing.
FREQUENCY OF ISSUE
Every time on sim load
REPRODUCTION STEPS
Please list clear steps you took in order to help our test team reproduce the same issue:
-
Load Zeppelin NT
-
Observe no noselines and bowlines modelled