Brief description of the issue:
they not following flight plan and Autopilot doesn’t respond!
Provide Screenshot(s)/video(s) of the issue encountered:
Detail steps to reproduce the issue encountered:
Brief description of the issue:
they not following flight plan and Autopilot doesn’t respond!
Provide Screenshot(s)/video(s) of the issue encountered:
Detail steps to reproduce the issue encountered:
have you tried to introduce a > 5% dead zone on your pitch and roll axis ?
@Flymike83: I mean the autopilot and nav doesn’t following Flight Plan. are you thinking that’s related to dead zone of joystick?
give it a go, I had similar issues and it did.
the problem as I understand it, is that if you dont have a deadzone the system thinks you are giving continous command movements thus not following the nav.
so give it a go, mine is at 8% and it works for me, but you may have to find your sweet spot.
@Flymike83: thank you so much for your big help I appreciate it. you saved my fun…
if you see any things wrong with my setting for sensitivity please kindly let me know
Except for the LT axis, the deadzones all look good.
Ensure you have done these three steps as well.
If you have done this and the problem persists, let us know.
However, this is a bug a lot of folks have experienced, and may not be correctable until some kind of patch comes out.
As far as the 320 goes, you could download the mod. It works.
Great tip…might explain my AP habit of wondering off course
This appears to be an xbox controller?
Be sure to increase the deadzones on both triggers.
@TheSevenflyer : I thought that by setting the dead zone, all aircraft would follow the flight plan! But yesterday I realized that these two planes still have the same problems ( Cessna 172 Skyhawk and SR22 )
they are not following Flight Plan even though I fix the dead zone and solved my previous problem with a320 neo and 787-10!
Good to hear.
Please mark as solved to assist others
Go to this linked post.
You should see a check box at the bottom for “Solution”. Click it.
no worries mate, happy you solved the issue
Hi @Bamzi6707!
I marked your post as “Solution”. In the future this is how you do it:
Thanks
Just changing flight model to modern and restarting solved the issue for me
I think it’s a lot of money and your fighting the controls 787 flies where it wants to .
Are you referring to the autopilot problems, not following lnav ,flightpath ,lnav vnav issues.