A330 Sim rate does not affect fuel flow

ISSUE DESCRIPTION

Description of the issue: Fuel flow in the A330 does not speed up with time compression (sim rate), I used the chrono to track the time to use 100 kgs of fuel during cruise and this was approximately the same at 1x and 4x sim rate.

This makes the A330 problematic for long haul flying. As you have to manually reset the fuel prior to descent or land with way too much fuel.

FREQUENY OF ISSUE

How often does this occur for you (Example: Just once, every time on sim load, intermittently)? Every time

REPRODUCTION STEPS

Please list clear steps you took in order to help our test team reproduce the same issue:

  1. Load A330

  2. During cruise turn up sim rate

  3. Check fuel use and compare to fuel use over time at 1x simrate

YOUR SETTINGS

If the issue still occurs with no mods and add-ons, please continue to report your issue. If not, please move this post to the User Support Hub.

What peripherals are you using, if relevant: N/A

[PC Only] Are you using Developer Mode or have you made any changes to it? No

[PC, MSFS 2020 Only] Are you using DX11 or DX12? DX12

[PC Only] What GPU (Graphics Card) do you use? Not relevant

[PC Only] What other relevant PC specs can you share? Not relevant

The Airbus A330 fuel consumption is not calculated according the the simulation rate.

When simulation rate is increased to x2 or more, fuel consumption remains calculated at x1.

Noticed this as well. It really ruins the experience for long flights. Same for A320 neo v2 BTW.

Example: Flying A330. Fuel 77.7 klbs. FFH 6530 lbs/h per engine. Turning simrate x8. After 1 hour of game time (accelerated time): Fuel: 76 klbs. Consumed 1.7 klbs instead of ~13.6 klbs. 1.7 * 8 = 13.7. Sim rate was not taken into account.

See existing report that includes all Inibuilds aircraft: Inibuilds Aircraft - Fuel consumption does not reflect sim rate