CTD/Freeze around 15/20 miles southwest of YMML

[Jinoss17]

Thank you using the Bug section, using templates provided will greatly help the team reproducing the issue and ease the process of fixing it.

Are you using Developer Mode or made changes in it?

No

Have you disabled/removed all your mods and addons?

No

Brief description of the issue:

Two flights, one inbound, one outbound YMML and I had one freeze and one crash caused by VCRUNTIME140.dll. Both crashes happened more on less on the same point around 15/20 miles southwest of YMML airport. I have no sceneries installed in all Australia apart from WU Australia.

Provide Screenshot(s)/video(s) of the issue encountered:

Detailed steps to reproduce the issue encountered:

PC specs and/or peripheral set up if relevant:

If on PC, Fault Bucket ID - Instructions here - Please type in just the Fault Bucket ID # rather than a screenshot for privacy reasons:

Build Version # when you first started experiencing this issue:

1.27.21.0

---

For anyone who wants to contribute on this issue, Click on the button below to use this template:

Do you have the same issue if you follow the OP’s steps to reproduce it?

Provide extra information to complete the original description of the issue:

If relevant, provide additional screenshots/video:

If on PC, Fault Bucket ID - Instructions here - Please type in just the Fault Bucket ID # rather than a screenshot for privacy reasons:

[Hester40MT]

Topic moved into Community Support for community assistance.

You may want to search the forum for VCRUNTIME140.dll and order by latest posts.

[Jinoss17]

Have you read my thread or not?

[MichaMMA]

@Jinoss17

more on less on the same point around

can you please share the exact location ? Best with VFR screen, etc…

We have a parallel topic from the old “grammar” issue, where exact that happens ( not sure whether is was already split into seperat topic : 100% reproducible CTD at specific coordinates for months [grammar.pggmod] - #172 by MichaMMA ). Some time with a vcruntime.dll , some times with a ntdll, etc.

[Jinoss17]

I don’t have the exact location: I was flying the CORRS9 departure out of YMML rwy 34 and it crashed just after passing waypoint GEDEN. At the moment I don’t have time to test again.

The other crash happened on the WAREN7A arrival inbound YMML around the same location, so 15/20 miles southwest of YMML.

[MichaMMA]

hmmm… rnw34 …I not 100% sure… but if I remember correct there is a topic where I already tested that

yep… think not exact same location, but it was near what I checked ( the dotted line )

EDIT: and I found it

MSFS Application Error - memory could not be read

So I went from 4 x 16GB running XMP to 1 x 16GB with XMP turned off running 2133MHz. I thought it was going well, but on approach to YMML below, it froze and CTD. [image] [image]

MSFS Application Error - memory could not be read

I assume these vcruntime.dll is a different thing. It comes often from GPU, but some times also from the G1000 mod, or others ( we have some topics in meanwhile where users report issues while approach, also in special YMEN. ) Thus I assume changing the installed RAM sticks, helped also in your case. What I assume is, in special if the mainboard compatibility listed your RAM, that 4 sticks without xmp should work. The issue comes often with is the xmp mode ( but some times also not, as mentio…

but so far I understood, that special thing was gone with SU10… Thus… we need the coords for rechecking whether it happends allways or it was one of the other possible reasons for a vcruntime issue.

[Jinoss17]

Not sure what the topic you linked have to do with my issue.

[MichaMMA]

a vcruntime issue in the area around YMML, YMEN

[Jinoss17]

Ok, my mistake sorry. BTW I stated the crash occurs southwest, but obviously it’s actually southeast of the airport given the route of the CORRS9 departure and WAREN7A arrival

[MichaMMA]

yep, at least in that area… I remember I can’t reproduce the old issue, may be if you have then again bit time and you can reproduce and share the coords, we can also try to reproduce that. And if more users can do that, it can possible become a bug state

[Jinoss17]

Ok, I’ve just flew the CORRS9 out of 34 in YMML and I flew a ILS rwy 26 landing in YMEN with the default C172 and I had no crashes.

So I assume that the crash is both casual and not casual because it happened two times in the same place.

Given that the last time I had crashes before SU9 I had to reinstall everything to get rid of them, I’m open to any other suggestions other than reinstalling everything.

[MichaMMA]

I would then test with the airplane you got the crash, as a recheck. I remember as example a case, where the “Analog ***” mods caused a crash only ( I remember it was the radar, or something else ).

[Gilovix]

Do you have the same issue if you follow the OP’s steps to reproduce it?

yes

Provide extra information to complete the original description of the issue:

on approach to ymml on the east side at about 15 miles with the default cessna bush trip from MSFS

If relevant, provide additional screenshots/video:

If on PC, Fault Bucket ID - Instructions here - Please type in just the Fault Bucket ID # rather than a screenshot for privacy reasons:

Détecteur d’erreurs 2093522411703939389, type 5

[TruthfulApe2930]

Same issue here mate, I was doing a flight from YSSY this arvo, when on Approach to RWY 27 i had a CTD. Seems to happen nearly every time around YMML same thing kept happening when flying from Hobart around WAREN waypoint.

[TruthfulApe2930]

FYI - i only have CTD on Approach not Take offs

[Jinoss17]

In the meantime I’ve made tons of flight without issues, so given that more people are reporting this, there’s something specific in this area.