Have to say if there was a way to switch out the wood it is the only thing I would change.
I see on Discord (and here) there will be an update soon?
Work on the update continues this week. Hoping to give it to the test team this week as well. I don’t have an ETA on release at the moment, though it won’t be super far off.
3 Likes
I am having an odd problem. I can make a flight, in VR, for any length of time, but if I restart the flight or choose a new flight the sim either freezes or CTD. This is fully repeatable but only happens in VR. All other aircraft are OK. I have tried with nothing else in the community folder, same thing. I have re-downloaded zip file, same problem.
Using Quest 3, Virtual desktop with an RTX3070ti.
Is anyone else seeing this issue is it unique to my setup. Thanks for any info.
I cant say this is anything we ran into during testing, but if others have a similar issue, do chime in!
The only things I can think to suggest for now would be to check drivers, clear the rolling cache (I would try this first), or reinstall the aircraft.
There isn’t really anything fancy that goes into VR support, so I am unsure what would trigger a CTD here.
1500R Sport v1.1.0 Update
The first update for the 1500R is rolling out now! The update is currently available from the Emerald Scenery Design website, and will be rolling out on ORBX and Marketplace in the near future. I do not have exact timelines for either, but the update should come to Marketplace next week!
You can log into your ESD account and download the latest update from here:
https://emeraldscenerydesign.com/my-account/downloads/
Thank you all - enjoy the update!
[MSFS 2020]
- Added ability to repair broken propeller to Blueprint.
- Added code to allow wheels to spin when hydroplaning.
- Added hardware detail for toe brakes.
- Added seatbelt.
- Added sound effect when fixing prop through slew mode or Blueprint.
- Adjusted flight model so that control inputs are less linear and more realistic.
- Adjusted sounds: Lowered wind volume. Rebalanced levels of many switches, controls, and foley sounds. Fixed precip sounds not looping and not changing with various simvar rates. Fixed rudder movement sounds not looping.
- Adjusted VR Pilot Camera positioning and corrected category.
- Fixed circuit causing autopilot key bindings to not work.
- Fixed fuel caps decal orientation.
- Fixed missing wheel water spray and engine start VFX.
[MSFS 2024]
- Added ability to repair broken propeller to Blueprint.
- Added additional preflight covers for Engine, Prop, and Static Ports.
- Added code to allow wheels to spin when hydroplaning.
- Added hardware detail for toe brakes.
- Added seatbelt and made it the exit aircraft clickable instead of the seat (no longer conflicts with trim).
- Added sound effect when fixing prop through slew mode or Blueprint.
- Adjusted flight model so that control inputs are less linear and more realistic.
- Adjusted interactive distance for preflight elements.
- Adjusted sounds: Lowered wind volume. Rebalanced levels of many switches, controls, and foley sounds. Fixed precip sounds not looping and not changing with various simvar rates. Fixed rudder movement sounds not looping.
- Adjusted VR Pilot Camera positioning and corrected category.
- Changed Pitot Cover Blueprint option to now add or remove all preflight covers.
- Fixed circuit causing autopilot key bindings to not work.
- Fixed fuel caps decal orientation.
- Fixed missing wheel water spray and prop vortex VFX.
- Fixed preflight pin locations for Ailerons, Rudder, Elevator, & Tailwheel.
- Fixed prop spinning and aircraft sometimes tipping over when spawning ‘On ground - Shut down’.
- Removed unnecessary ShadowCenter camera (Not used in 2024).
6 Likes
Thanks for your reply. I tried deleting Rolling Cache and with empty Community Folders and only Moza Cockpit software running other than MSFS2024. Still unable to restart a flight or start a new flight after the first.
In desperation, I disabled all streamed content in My Library, this seems to have solved the problem. Now all I have to do is discover which one it is. 
I love this aircraft, it reminds me of my favourite RC model, my 1/5 scale Bowers Flybaby which I would like in MSFS. 
1 Like
Definitely let me know if you figure out what is causing the issue.
And yes, it is very close in design to the Fly Baby!