I encountered a new error today: DXGI_ERROR_DEVICE_RESET (0x887a0007).
Never had this before !
I believe the NVIDIA drivers 576.40 and 576.52 are the reason why MSFS 2024 SU2 is crashing constantly.
I recommend reverting back to 576.28.
I encountered a new error today: DXGI_ERROR_DEVICE_RESET (0x887a0007).
Never had this before !
I believe the NVIDIA drivers 576.40 and 576.52 are the reason why MSFS 2024 SU2 is crashing constantly.
I recommend reverting back to 576.28.
There is a dedicated and evrler growing thread here outlining the same issue. To consolidate votes, can you please post and vote hereā¦
https://forums.flightsimulator.com/t/dxgi-error-device-hung-0x887a0006/666759/126
This issue has been going on for years but appears to be getting worse. Asobo dont particularly seem to care. Best way to raise attention is to vote in a central place.
In addition to my previous posting (new intel arc b580): I tried everything I could find related to this error, also did a VRAM memory test. The final result of my investigation: I can make the sim work if I choose a start location, where the VRAM requirement is exactly below 6 GB. As soon as I choose a location (or settings) that require more VRAM the sim crashes. This is reproducible. (see attached screenshot). Well, this workaround means I am looking for places close to my desired flight area. As soon as I fly I can add e.g. āreal weatherā. This way I can fly reducibly over areas, which would cause a crash if chosen as original point of departure. Bizarre. I am thinking of returning the GPU since I can not assess weather this is a software or hardware problem.
its a sim update 2 problem didnt happen on sim update1 also flight sim 2020 works fine so I went back with that Iām also using intel lunarlake
I was able to solve my Error after several frustrating days of trying different things (same HUNG as above) by uninstalling Nvidia driver and rolling back to 576.28. I just picked that one randomly so Iām sure other older ones fix the issue as well.
Can any moderator (@CasualClick or @TheSevenFlyer maybe) explain why this bug does not appear on the all time bug list that was displayed during the DevStream?
The issue clearly isnāt resolved (sounds like its getting worse), is marked as bug logged and doesnāt appear to have received any attention.
Regards,
Iām not sure it is - I get this crash on every driver version applicable to my 5090 card.
I asked before and Iāll ask again, why is this thread marked as āfeedback loggedā not merged with the ābug loggedā version of exactly the same issue?? Combined there is over 140 votes. This is clearly an issue for a lot of users that is not being given the attention it deserves.
@TheSevenflyer @CasualClick Are you able to assist merging these threads? The other thread is here:
Volunteer Staff have no control over Bug Reporting. That is strictly the purview of Community Managers. They do review all the reports and as you heard on the recent Dev Stream, even Jorg has a hand in the List Reporting.
I wonder what we might need to do to get some comment from one of the CMās then around the absence of this bug-logged report in the all time listsā¦
In my case, it was definitely the driver! I havenāt seen any error pop-up since reverting back to version 576.28.
We are looking into it, a note has been sent to the CMās to ensure they are aware of it.
Thanks @TheSevenflyer and the CMās whoāve now cominded the threads into a single BUG LOGGED thread.
I hope it now appears on the all time big list moving forward.
Cheers
This error is ridiculous⦠upgraded my video card (from 3080 to 5080) as the previous one was faulty and causing black screens and fans 100% to now getting this error within 5 minutes of leaving the runwayā¦
Ever since launch Iāve only had 21 hours in the sim and basically gave up on it.
MSFS 2020 is actually fine (ish)
Iāve read about the regedit trick with TdrDelay and TdrLevel⦠nope not working either.
DDU uninstall and reinstall 576.28 did it for me. Insane FPS >100 afterwards on flight to Ksan with PC12, 4080,5800x3D,64, dx11,all on high.
Same error on a Intel Ultra 7 265KF, Intel B580 12GbVram, 64GB Memory, latest drives as of this morning 25/5 /2025 being getting this since last FS update up to that no issue, Issue is reproduceable 100% of the time Getting this error on all challenges when zooming into MAP, Getting Error Went zooming into map that requires large memory even in free flight , but works when area does not require large vram, have set resolution to low-end reduced the res to 1080P turned off real time weather , multiplayer etc , this was working Find until the, last round of updates DCS work like a champ, how come a 3th party can make updates to a application without these sort of major system bugs and Microsoft canāt ,
MS Please fix itā¦
I am still getting this error. Sometimes i can fly 12 hours straight ⦠others it will crash within the hour
.. very odd
Getting this error with the amd drivertime out alltogether.
Dont know if its the game or the video card.
I am considering switching to nvidia but not sure if its a faulty video card or the game
Did memory test, passed, tried all video card drivers same problem
right now i am experiencing this dxgi-error-device-hung thing in msfs2020 and in 2024 . I have never had that before SU3 Beta. i opted out of Beta and the error persisted. in fs2020 i wasnt even able to load into a flight until i reverted back to an old 5.66.xx driver from march. After installing the driver i could at least start a flight in 2020 and fly for a few minutes. since i am mostly flying in 2024 i installed 576.28 again and i can have a wonderful, stutterfree flight with constant 45 FPS in VR for a few minutes . Then the dxgi error appears again. At first i thought the openxr tools are the culprit. After deactivating it i thought the error was gone but i was wrong in the endā¦
Iām having okay luck with 576.28. I did a clean install with NV Clean Install.
Since SU2 I experience the same issues as reported in the other posts.
Intel Arc B580 on Ryzen 5 5500, 16GB RAM, 2 TB SSD Nvme. Latest Drivers and older drivers - all the same.
I had no problems prior to SU2 Cleaned shader cache, didnāt solve the problem. I monitored the VRAM on SU1 and could use scenery with up to 12GB of VRAM no problem.
ReBar is enabled. No problem on any other games or MSFS2020. Reproducable in Funchal area on Low, Medium and high settings.
Bucket ID: 1951764313632642949, Typ 5