version 0.7;
- Adjusted approach lights offset from 30.48 (default) to 10 meters.
- Connected parking spots to the taxiway routes.
- Changed parking spots from medium to large with a radius of 22.
- Added a vehicle spawn point and connected a route to parking spots, for the fuel trucks.
- Expanded the apron a bit to have a fuel truck area with some props.
- Corrected some waypoints and paths.
- Physically disconnected L1 from path so ATC doesn’t use it (temp solution).
- Corrected some taxiway signs.
- Added some extra painted lines on the civilian apron.
- Added Eindhovense Aero Club apron and 3 small parking spots.
- Removed freq 122.100 (tower/approach) as these are emergency freq.
- Removed the runway edge line as EHEH 03-21 does not have this.
On request from someone of the Eindhovense Aero Club I have added an apron at their club’s hangar and have added 3 small parking spots for a single prop airplane. These spots are on the N general parking place.
After fiddling around I have decided to disconnect L1 path from the civilan apron so ATC won’t use it as a temporary solution as “closed” taxiway didn’t seem to be honored at the moment. On the other hand, routing is now correct, though it doesn’t say to cross or use the runway from L2 > R3 unfortunately.
*Don’t ask me why runway 21 is shown as 03 in the POI marker, everything is set correctly…
Edit; It does seem to mention “cross runway” when navigating back to the gates after landing low, ATC is being picky now, wasted so much time trying to figure this out.
