There is possibilities to change a to a for vfr. I will investigate it.
1 Like
There is beta test online. Did ask @Descent2Wild and @MilitaryMav to test it. Here is Changelog for upcoming update:
Changelog 9.1.2024
- All the flights from A to A, are now VFR flights.
- All the flights from A to B, are now IFR flights.
- DA40 and C152 is updated, was doing 360 degrees spinning on the ground.
New traffic density settings:
1% = one c152 in every airport, that have atleast one parking spot
2% = c152 and da42 in every airport, that have atleast two parking spots
20% = c152, da42 and c152 in every airport, that have atleast three parking spots
40% = c152, 2x da42 and c152 in every airport, that have atleast four parking spots
3%-99% All the rest of the traffic (IFR traffic from a to b, hot balloons, helicopters, bizjets)
5 Likes
Thank you so much for doing this… downloading to test now
Well first reactions are really good. Local traffic now asks for departure straight out, which sounds so much better than IFR to the same airfield. Aircraft are also given instructions such as join downwind, or clear to land after aircraft on base, etc… which again is so much more realistic than everything coming straight in on the ILS.
So, thank you, that is a great improvement!
I am hearing quite a lot of traffic getting told they didn’t have permission to take off. Not sure if that’s a problem with FS AI?
And, it would be amazing if we had some more variety of aircraft. Currrently everything seems to be Cessna or Diamond, but I guess that is because you’ve made the models more efficient and that’s time consuming?
I’ll keep testing.
1 Like
is the beta version available to the public please? I’ve looked at flightsim.to and your discord channel but can’t see it anywhere.
1 Like
Well, only for those two. I will release it later today in .to
1 Like
There is lots of diffrent aircraft models in the sky. But in airports mostly c152 and da40 and c172.
If you put for example 20% density, there is c152, da40 and c172 in every airport (vfr a to a flights) + ifr (a to b) flights with diffent gamod models (c208b etc) and AIG models (if you have those installed).
That’s great news! Look forward to trying it out
1 Like
GAmod is updated: GAmod - offline version (World overhaul edition) for Microsoft Flight Simulator | MSFS
Changelog 9.1.2024
- All the flights from A to A, are now VFR flights.
- All the flights from A to B, are now IFR flights.
- DA40 and C152 is updated, was doing 360 degrees spinning on the ground.
- Some community wished made (deleted traffic from some IRL closed airports)
New traffic density MSFS settings:
1% = one c152 in every airport, that have atleast one parking spot
2% = C152 and DA40 in every airport, that have atleast two parking spots
20% = C152, DA40 and C152 in every airport, that have atleast three parking spots
40% = C152, 2x DA40 and C152 in every airport, that have atleast four parking spots
3%-99% All the rest of the traffic (IFR traffic from a to b, hot balloons, helicopters, bizjets)
8 Likes
i will be releasing new, even bigger update in coming days.
- 5x new general aviation models
- one notch better LOD: LOD 4 -) LOD 3 (looks better, performance is the same)
- stock, original 2K/4K Liveries (looks awesome)
- optimised propellers, gives performance and still is slightly visible)
- new density settings with more model variance with overhauls airports (every airport in world)
Can you spot new models?
10 Likes
Who wants to beta test this new update? It is finished. PM me, if interessed.
2 Likes
I’d love to try it. Trying to figure out how to PM!
Huge update with version 5.0!
See it in action here: https://youtu.be/Tce4SsQGbfo?si=xq66hx78Z8G-Ey4Y
Download here: GAmod - offline version (World overhaul edition) for Microsoft Flight Simulator | MSFS
Changelog 13.1.2024
- 5x new general aviation models (DA62, G36, DR400, CAP10, SAVAGE CUP)
- one notch better LOD: LOD 4 -) LOD 3 (looks better, performance is the same)
- stock/original 2K/4K Liveries (looks great, takes little bit performance)
- optimised propellers, gives performance and still is slightly visible)
- variety of ethinics of pilots (males, females, hispanic, uniforms with bizjets etc)
- new density settings with more model variance in overhauls airports (every airport in world)
- Helicopter atc airline call names has now variety of some (by request):Bell 407 Airbus H135, Airbus H125, Bell 429, MD-500, Robinson R-44 etc
- Helicopter liveries has also some variety (difrent colour to match with new atc call names)
- Helicopter and balloon traffic has 3-4 diffrent density option: own community packs to pick one (high density, medium density, low density, ultra low density)
KNOWN BUGS:
- some times Asobo aircraft are sliding out from the parking spots and end up sliding away from the airport. This is 100% MSFS glitch and it is something to do with certain airports, because it is happening with difrent aircraft´s in same airport´s same parking spot.
New traffic density MSFS settings:
1% = one c152 in every airport, that have atleast one parking spot
2% = C152 and DA40 in every airport, that have atleast two parking spots
10% = C152, DA40 and C152 in every airport, that have atleast three parking spots 20% = C152, DA40, C152, C208B in every airport, that have atleast four parking spots
3%-99% All the rest of the traffic (IFR traffic from a to b, hot balloons, helicopters, bizjets)
IMPORTANT INFORMATION ABOUT AIFLOW!
Newest version of AIFlow also supports a traffic density management feature called AICull that removes excess AI traffic in the user’s reality bubble according to several parameters (e.g., distance from the user, max number of AI in reality bubble, preferred ICAOs, aircraft type, etc.) in order to increase FPS. AICull is recommend for .bgl traffic (e.g., MSFS AI Offline, GAmod), such as general aviation .bgl-based mods.
Caution should be exercised using traffic injectors, such as FSLTL, AIG TM or Just Flight because traffic removed by AICull may be promptly “re-injected” by the injectors causing a traffic removal-injection loop. However, certain injectors may not exhibit this behavior.
AIFLOW OPTIONS YOU NEED:
- AICullEnable=1
- AICullDistance=45 (in nm, 45 is pretty optimal. Default MSFS in 80-90 nm)
Optional: - AICullMaxAIAllowed=100 (with this settings, your max FPS is allways the same, you can use density slider of 100% and having so much variety of traffic 45nm from you, and still having great fps because there is only 100 models injected. Gamod works better this disabled)
Launch first MSFS. When in the scenery, launch AIflow.
10 Likes
Important hotfix. France added! Just copy and replace in
corstens-hangar-gamod-offline-world-overhaul-HQ-LOD-version\scenery\world\traffic
download link here: Traffic_GAmodWorldOverhaul11.bgl - Google Drive
1 Like
Hello everyone,
I’m French and I’m doing small flights in particular around Quiberons in Brittany.
I use a FSDreamTeam addon for this airfield (LFEQ)
I recently installed GAmod version 4 by following the procedure step by step, unfortunately the only aircraft visible were Tbm 930s as if GAmod didn’t work.
I did the installation procedure several times without success.
Do you have any idea where the problem might be coming from?
I’m going to download version 5 and I see that there’s a hotfix for France too, maybe I’ll have better luck with version 5 and its hotfix.
Merci d’avance
Olivier
The france hotfix is one message upon yours 
1 Like
Thanks, it works now and it’s great.
I was wondering if it was possible to have more Robin DR400 on French airfields instead of Cessna caravans by modifying one or more GAmod files ?
Communitys wishes, i provide!
There you go (DR400 France wish) https://drive.google.com/file/d/1nWeJQ7EP49ZVn8ruDkXcgk2KISuNqkpV/view?usp=sharing
DR400 starts to show with 20% density in every France airports. Let me know, if it works for you.
1 Like
Thank you for your attention, it’s much appreciated.
I’m going to do some tests on several airfields and I’ll let you know tomorrow at the latest.
1 Like
Hi, I just sent my 4070ti back to Amazon to get a 4070 ti super or a rx7900xt…
As soon as my pc is operational again, I’ll do the test.
See you soon