Brief description of the issue:
When landing airliners (B748, B787, but haven’t really flown anything else to check if it is present on other aircraft) at Vref speed as indicated on the FMC, after cutting power at ~30ft and beginning to flare up, the aircraft starts climbing initially and then floats about 10ft above the runway.
Provide Screenshot(s)/video(s) of the issue encountered:
Video can be found here;
Details;
A landing at KSLC (Salt Lake City) in the clear conditions preset showing off the ground effects which I think are way too exaggerated. I had to reapply power after the aircraft started climbing and then floating down the runway, and ended up getting a touchdown speed of -72FPM according to Gees landing analysis.
Aircraft had a Vref speed of 146kts at 30deg flaps (which was set) indicated on the FMC.
Aircraft had a payload of 116,540lbs (shown as 25.80% on the weights screen) and fuel load of 49,154lbs (shown as 12.00%). It was well within CG limits.
Sim version is 1.12.13.0. (Sim update 2).
Detail steps to reproduce the issue encountered:
Land an airliner at an airport.