A very simple request, although would be appreciated by many.
Can you please increase the radio navigation sound volumes significantly for morse code dots and dashes?
Hearing morse code sounds through radio to identify beacons is almost impossible to hear, even at 100%.
Hi MagicTurtle7738,
Welcome to the forum !. I have edited your title to better reflect your wish and add some tags for easier identification.
Agreed, the morse code is a bit too quiet to hear. Also, in Microsoft / Asobo planes, the approach altitude callouts (100, 50, 40, 30, 20, 10) are almost inaudible. If I turn volume up to hear it, then I get blasted by ATC and other sounds that are way too loud. Surely there can be some kind of sync to ensure volume of different sounds are at a similar level.
I know some autopilots/PFDs have a NAV volume setting (which may or may not be operable), separate from the sim sound settings. Worth trying if it appears on the panel?
Full volume on the cockpit radio volume (and sim settings), still barely audible, while other sounds are much louder
Thank you for using the Bug section, using templates provided will greatly help the team reproducing the issue and ease the process of fixing it.
Are you using Developer Mode or made changes in it?
No
Have you disabled/removed all your mods and addons? If the issue still occurs with no mods and add-ons, please continue to report your issue. If not, please move this post to the Community Support section.
Yes
Brief description of the issue:
Since the very beginning, the morse code idents in MSFS have been inaudible, so proper instrument flying is rendered virtually impossible in non-EFIS aircraft. All that has to be done is to make them louder.
Provide Screenshot(s)/video(s) of the issue encountered:
not required - this happens in all aircraft in MSFS
Detailed steps to reproduce the issue encountered:
try and listen to morse code idents
PC specs and/or peripheral set up if relevant:
not relevant
Build Version # when you first started experiencing this issue:
first MSFS release
For anyone who wants to contribute on this issue, Click on the button below to use this template:
Do you have the same issue if you follow the OP’s steps to reproduce it?
Provide extra information to complete the original description of the issue:
If relevant, provide additional screenshots/video:
Do you have the same issue if you follow the OP’s steps to reproduce it?
yes
Provide extra information to complete the original description of the issue:
If relevant, provide additional screenshots/video:
Do you have the same issue if you follow the OP’s steps to reproduce it?
Yes
Provide extra information to complete the original description of the issue:
as per above
If relevant, provide additional screenshots/video:
Same to me.
Same for me.
Squeeky wheel gets the grease?
hi! does your msfs longitude do the NAV 1 activated ILS frequency morse beeps beeps? Mine doesn’t
Been an unaddressed problem since release –
I’m getting normal Nav Morse in several of the GA aircraft I’ve used. In general, Anything with the 530/430 I just push the ID button and adjust it’s volume (red circles) and I’m getting plenty of volume. I’ve got my engine sound turned down some from the default, since I’ve always worn either a headset or helmet and it’s closer to what I’d hear normally for engines.
I obviously haven’t test all aircraft, but at least I know this one works fine, IMO. I’d be glad to test some other specific aircraft if you’ve got one in particular that’s an issue and see if I can duplicate the issue with those planes.
Regards
Depends on what you call Plenty of Volume.
In MSFS the NAV MAX volume is far less than the COM max Volume.
They should be a lot more similar. (as they are in RL )
