It seems to me that they ding for landing lights in broad daylight local time if it’s night GMT?
1 Like
yes - just keep your landing lights on permanently for now.
1 Like
do you have missions with Pilatus PC12 or Cessna citation? or its just my issue?
2 Likes
I don’t even have that slider, do you get it after IFR cert?
1 Like
yes and after night rating
1 Like
I have the same issue, it took me down 2 levels of reputation in a single mission even tough everythig went fine with the flight.
Had many of the same issues as above but I’m still getting started at LvL25. Currently, my biggest complaint is the C172 during circling. The trim bounces from one extreme to another. The plane jolts up and down in sudden moves. The plane is ‘no fun’ to fly this way. On final it seems to settle. Is this normal?
Also, I can’t seem to make over 900Cr (even on Missions that have 8000+Cr as a reward) on any cargo mission even without any performance hits. Is this normal?
There are so many bugs (visual, getting set up on closed runways, wrong Notices…) and I’m just in the starting levels of the Career Mode, hard to believe Asobo didn’t notice these. They do use the same program we do right?
Edit: Can Asobo set up options for weather in Career? Clear days/no wind would be a nice option for those of us casual flyers. At least have the option. 2) It’d be nice to be able to filter missions (by airplane, min reward, type of mission, even size of airport).
2 Likes
Nope these dont seem to generate at all, neither freelance or company. My VIP Pc12 can not do a singular mission
1 Like
I have not observed this. You’re saying the trim is moving stop to stop, uncommanded? Is autopilot on?
If it’s doing that, I’m guessing you have a binding that’s interfering.
There are wishlist items out there for both of these.
Baffling. I can confirm I had every single bug on this list too.
3 Likes
Moderator Edit:
Hello
It is impossible to assign a functional trim on the H125 helicopter, which is very annoying, especially for long missions.
Good luck to all
Bonjour,
Impossible d’assigner un trim fonctionnel sur L’hélicoptère H125, ce qui est très embêtant surtout pour les missions un peu longue.
Bonne continuation à tous
ISSUE DESCRIPTION
Description of the issue:
Every time I land during a mission (any kind), ATC tells me to take the first taxi out of the runway. There is no reply (via quickreply or opening the ATC window) but each time I enter the taxiway (well before the stopping point) I get a penalisation for not having communicated to ATC my exit.
If applicable, which aircraft is experiencing this issue:
DA 62, C172 (all I used)
[PC Only] Did you remove all your community mods/add-ons? If yes, are you still experiencing the issue?
No add ons
FREQUENCY OF ISSUE
How often does this occur for you (Example: Just once, every time on sim load, intermittently)?
Everytime
REPRODUCTION STEPS
Please list clear steps you took in order to help our test team reproduce the same issue:
- complete a mission
2.land on runway
3.attempt to leave the runway towards a taxiway
YOUR SETTINGS
If the issue still occurs with no mods and add-ons, please continue to report your issue. If not, please move this post to the User Support Hub.
What peripherals are you using, if relevant:
TCA thurstmaster (flightstick and levers)
[PC Only] Are you using Developer Mode or have you made any changes to it?
Normal mode
[PC Only] What GPU (Graphics Card) do you use?
6600 XT
[PC Only] What other relevant PC specs can you share?
5900X CPU
For anyone who wants to contribute on this issue, Click on the button below to use this template:
Do you have the same issue if you follow the OP’s steps to reproduce it?
•
Provide extra information to complete the original description of the issue:
•
If relevant, provide additional screenshots/video:
•
ISSUE DESCRIPTION
Description of the issue: When following the taxi clearance, and the blue arrows; entering the (active) runway, results in getting you an “Aviator performance” deduction.
If applicable, which aircraft is experiencing this issue: All aircraft.
[PC Only] Did you remove all your community mods/add-ons? If yes, are you still experiencing the issue? Yes.
FREQUENCY OF ISSUE
Everytime you have an aiport lite this (LIPK). But also KFSO.
REPRODUCTION STEPS
Please list clear steps you took in order to help our test team reproduce the same issue:
- Any mission in Carreer mode, where you start at an airport with an layout that requires using or crossing the runway to get to the stop short area.
YOUR SETTINGS
[PC Only] Are you using Developer Mode or have you made any changes to it? no
[PC, MSFS 2020 Only] Are you using DX11 or DX12? dx12
[PC Only] What GPU (Graphics Card) do you use? rtx 3080
[PC Only] What other relevant PC specs can you share? Nope
[END OF FIRST USER REPORT]
For anyone who wants to contribute on this issue, Click on the button below to use this template:
Do you have the same issue if you follow the OP’s steps to reproduce it?
•
Provide extra information to complete the original description of the issue:
•
If relevant, provide additional screenshots/video:
•
Did you have your appropriate lights switched on before entering the runway?
Landing ánd Taxi
I also tested only Taxi lights. Same issue
1 Like
The ATC logic on entering or exiting runways for backtaxi is flawed.
1 Like
No autopilot in any of my missions. I think, and it’s only me thinking, it has to do with thermals and/or weather. Other airplanes have the trim going erratic also during missions but settle during landing sequence. I’ve checked Assistances and AI trim is off. Other times, there’s zero issues. Baffled.
Now I’ve learned the Cessna 208 has a steady trim during missions, why this one and not the others?
With that said, I really am learning to enjoy the Career mode. I think it’s a great feature. But once this trim chaos is fixed it won’t be so stressful though.
I’m having trouble understanding because I haven’t seen it. Trim is a physical control that has an indicator. Its actuated either by button or axis or automation.
You’re saying that you’re observing that indicator go from stop to stop in turbulence without being commanded by you or the autopilot to do so? I’ve seen pitch go all over the place, but I’ve never seen trim move uncommanded without some sort of binding or automation (including assistance) controlling it.
I know we are no where near mentioning polish items with all the major bugs right now, but I also noticed the Tail numbers on your career planes seem to change quite frequently, seems like whatever randomizer for employee mode continues to half work for your owned planes… or at least they stay consistent until you fly the same type of plane in another mode. I feel like a random tail number should be generated on purchase, and be stored information and visible when managing the aircraft… and stay consistent.
1 Like
It’s only with Missions. I was able to take a ‘good trim’ video in free flight with C172 but the video screen shooter thingy doesn’t want to work again or I was going to post the issue. Taking off in missions, trim is solid, it’s only when getting to the spot the passengers want to observe/take pictures, the Blue Doughnut, that’s when the the trim goes erratic.