Tried from the ground climbing with 3000’/min and it kept 100% until the 250kt i set
But the point was that it should not exeed 95%,as set in the config files, and as its doing in flc
This appears to be a bug. The autopilot / autothrottle settings should limit to 96% N1 as should the built-in engine performance values in the engines config file. Not sure what is causing the over-ride. Have you tried without WT G3000 to see what happens?
I don’t have this issue with the WT G3000 mod (use version 0.7.4a), and it’s certainly not related to Dakfly’s mod. Working Title /G3000 - v0.7.4
without WT’s G3000, both VS & FLC goes to 100% throttle
With WT’s G3000, only FLC is limiting throttle, while VS is going 100%
No big deal anyway
(latest version for both your mod and G3000)
I tested the scenarios you indicated (AT to 250kts 3000 fpm, and an FLC climb), and I didn’t see N1 exceed 97% in either case. Just to be sure I also cranked up the air temperature to 35C at sea level. N1 didn’t exceed 97%, but N2 went a little over 100%. In neither case did I see N1 go to 100% on the gauge. Can you give me some more parameters to throw at this so I can see if there’s something else causing a problem.
As far as throttle position, going to 100% throttle shouldn’t be a problem as long as we don’t see N1 or N2 exceed their respective limits. In the test I just described, N1 stayed within limit, but in hot temps N2 did exceed limit for about a minute.
1 Like
I’ll redownload both mods and try to record videos tonight if issue still persist👌
I redownloaded both mods, and still got the problem only with VS
With FLC everything is fine at 96% max
Thanks for sharing. I see this problem, but I wasn’t able to replicate this. Perhaps this is an issue in the Live Weather mode. I tested using manually edited weather settings.
1 Like
Does the TO/GA button work? I did fly a go around, and pressing them with A/TH enabled did nothing.
Also, can I map the A/TH buttons?
Yesterday I flew the Longitude with no problems. Today I can’t get the engines to start. The Fuel Valve stays on CLOSED and will NOT go to OPEN.
What did I do wrong?
Your flaps setting seems too high, I use first notch only, unless I’m seeing it wring in the vid.
*wrong not wring
Hi Dakfly, do you use the latest Working Title G3K 0.7.4a mod? This is what I use along with your great mod and lately I’ve been seeing the moving map freezing. Seems intermittent and doesn’t always happen with every flight. Can’t see any other posts in the various forums about this problem and was wondering if you have heard any chatter on this issue?
I haven’t seen any reports of this. Probably something to report to the WT team.
Don’t know and the mod doesn’t touch cockpit functions other than a couple of superficial changes. Have you tried again since and replicated the problem?
Better question for the main citation longitude forum. This is for the mod only - no significant modification to autothrottles or cockpit functions in this mod that would affect this functionality.
I was told to use flaps 2 for TO, like IRL🤷🏼♂️
1 Like
Flaps 1 for longitude. Try that. Maybe Your engines are working against the flaps? Just a thought and maybe worth a try?
I’ve reported this issue in the WT discord and no joy. Not even an acknowledgment. You use WT 0.7.4a?
