Seemed to remember it was a slight balooning upwards when I tried them in MSFS 2020 but that could just be my poor memory and/or the previous model was not as realistic?
In 2020 it’s a slight downward dip.
Must be my memory then …
How do you open the paper chart that’s tucked away in the door? I click the click spot in the door but nothing happens?
They way I thought of it was this.
The high wing flaps induce drag above the centre of pressure, the plane rotates in that direction, and the nose comes up. The low wing flaps induce drag at or below the centre of pressure, and the nose goes down.
1 Like
It’s been disabled pending a fix in the next couple of days.
Martyn - Just Flight
Are those of you with the GTN not powering on issue using the Arrow bundle product? And does this only happen with the PMS GTN, or also the TDS GTNXi?
Martyn - Just Flight
It is highly appreciated that Just Flight provided those updates!
I used version 0.6.0a of the installers of the Arrow Bundle (Arrow III, Turbo Arrow III and Turbo Arrow IV) in MSFS2020 and 2024.
Unfortunately, no GTN750 option is available under “Aircraft Options” in MSFS 2020 and 2024 - neither the PMS nor the TDS version.
Can you please fix this, as it worked from the beginning and the PMS GTN750 should be natively supported by the Arrows. Thank you.
1 Like
For those of you that are having the issue with the PMS GTN 750 not working when using the PA28 Arrow bundle product, we think that we’ve identified and fixed the issue.
We are working on confirming that and updating the installers ASAP, but in the meantime you can download a hotfix here:
PA28 Arrow bundle (2020): ShareFile
PA28 Arrow bundle (2024): ShareFile
You will need to manually paste the contents of the relevant zip into the aircraft package folder (within the Community folder), overwriting the existing three files.
NOTE: This fix is for an issue that only affects the PMS GTN 750, not the TDS GTN or WT GNS 530/430. And it doesn’t affect the non-bundle Arrows or Warrior. We will continue to investigate any other GPS option issues but please be sure to refer to my post here regarding making sure to have the radio lights set to full brightness: PA-28R Arrow III from Just Flight - #1824 by NORTMAR
Martyn - Just Flight
2 Likes
The PA28s natively support the PMS GTN, TDS GTNXi, and Working Title GNS 430/530. We’re working hard to resolve the issues that some users are having with those.
Martyn - Just Flight
2 Likes
Sorry if I’m missing something obvious here but how do I change the amount of fuel I start with in the Arrows. Regardless of what I set in the sim menus it always starts fully fuelled?
You should be able to use the default EFB for that in MSFS 2024, as that replaced the fuel/payload menu.
Martyn - Just Flight
Ah, thanks for prompt response. I had tried that but hadn’t realised I needed to click the load aircraft button after 
1 Like
Yes - that was my question too… The textures seem very blurry indeed…
Yes! I actually chased the ‘new stuff’ for a while and went back to all the Arrows again a little while ago. They are quite magnificent. The Comanche is wonderful too, but seems like people got a little uppity about the JF series for a while when it released, then 2024 came in. Considering the JF Arrows are truly standard avionics form-factor setups, they are at the absolute top for general GA singles with their suite(s). Comanche is a very specific modeling of a very specific aircraft. They are all just such a solid ‘GA experience’, especially with 2020 so well sorted. The 2024 availability is great news, but someone in 2020 that doesn’t have the JF stuff yet will get quite the lift to 2020 getting them. Definitely must-have or you haven’t fully experienced everything 2020 yet.
4 Likes
Do you guys also have quite blurry textures (labels on the panel) - it looks very washed out and not well readable. I thought these are new textures and made for 2024?
I think it’s a known issue with fs24. The same thing happens with Milviz/Blackbird’s PC-6 Turbo-Porter.
The screenshots on our website were taken using the latest version of the PA28s in MSFS 2024: Just Flight - PA-28R Arrow III & Turbo Arrow III/IV Bundle (MSFS)
They show what you should be seeing.
Martyn - Just Flight
Hi gus
This seems to refer to models of MSFS 2020 loaded into MSFS2024 - but in this case it seems that those new versions should be optimized for 2024? That’s why I was surprised to see this kind of blurry stuff…
Whilst these have been updated for MSFS 2024, with the improvements laid out in the change logs, we have not created new textures or overhauled the artwork in any significant way. Our focus remains on updating our entire MSFS 2020 fleet to work in MSFS 2024 (free of charge) before we consider any significant MSFS 2024 specific upgrades.
That said, I don’t consider the textures to be blurry, so please check the product page screenshots and latest YouTube videos.
Martyn - Just Flight