Just landed in a freelancer mission in career, first time in the PC24. After landing the airplane refuses to turn. Seems like the airplane is behaving like it’s on AP following the ILS, but the AP is off. When I turn, I see my rudder pedals in the cockpit move as expected, but there is no movement of the actual aircraft. I can only go in a straight line. How do I fix this?
And I was landing manually, disconnecting the AP like 20 nm out.
Must be a bug in career mode. In free flight mode nose wheel steering works perfectly.
I had to abort the mission, and then after the next landing, the nosewheel worked fine. I havent used the Alt N to skip to the next phase since that though.
Was it possible to turn after slow down? like less than 40 knots?
No. I had come to a complete stop because I was unable to turn off the runway. Then I tried several start and stops but the turning never returned.
It’s a bug. If it happens just go off the runway so it gives you the option to skip to parking. Not the best sollution but atleast you can finish the mission.
I found that the nose wheel was not linked to the rudder in my setup, which what I normally have.
Setting this up in the controller UI worked for me.
Well my nosewheel was working fine on the departure airport. It was not working after landing, so something was working fine in one part of the flight, and then stopped working in the last part of the flight.
YES, YES this is a bug. My PC24 steering works great in free flight. But 100% in a freelance career missions, my nosewheel gets disabled after I make a perfect landing. Now you can’t taxi to the hold short and the mission is wasted. I also noticed that when I use Alt N to skip the taxi, or advance to FINAL I am at 4X sim rate. Happens every time. So yes this is now reported by several people.
Remember, nosewheel steering works great in Missions when I taxi and take off, but only after landing do it get disabled. Very ODD!!! In free flight nosewheel is no issue.
This issue has been reported many times in the main pilatus-pc-24 thread:
PC-24 is completely broken (Still broken on PC after Patch 3 1.2.7.0) - #188 by BWS511986
PC-24 is completely broken (Still broken on PC after Patch 3 1.2.7.0) - #191 by DeathBySybian
PC-24 is completely broken (Still broken on PC after Patch 3 1.2.7.0) - #195 by DeathBySybian
PC-24 is completely broken (Still broken on PC after Patch 3 1.2.7.0) - #214 by KillingJoke1976
PC-24 is completely broken (Still broken on PC after Patch 3 1.2.7.0) - #231 by Kne19740404
Don’t skip to landing. Use Sim rate instead. You get paid more and it only takes a few minutes at max sim rate.
Yupp nosewheel steering is INOP after landing in freeflight, great… Thought it was fixed but ofcourse not.
It’s wild how everyone has different experience, many saying that this is STILL broken after the latest patch. For me it was fine but broke after the latest patch. I just need to make sure I don’t land straight so I can accelerate and go off to taxiway and ALT+N.
Just landed in the PC12 after patching today and this issue is back. …
This is only the case if you skip cruise. If you do the entire flight, you can steering fine after landing.
Moderator Edit:
PC24 is a cool airplane, but I can’t use it because I can’t turn after landing in free or carrier mode.
Please fix it as soon as possible
PC24カッコイイ飛行機なのにフリーやキャリアのモードで着陸後曲がれなくなるから利用できません。
早急に修正してほしい
Same issue today !! I have used Alt N to skip part of the long flight
The same for me. In career mode as well as in freeflight mode.
Had this same issue today, PC-24, Career mode (Employee) - not that it seems to matter. Used the run off the runway then skip to the end trick to get past it, was a really long Medevac too was glad not to lose that time.
Same issue, after skipping the steering doesn’t work. Noticed that right after skipping, the LG is commanded down with an overspeed. Maybe that’s the bug which cause a NLG malfunction due to the overspeed.