I was just wondering if any one else was having ATC problems specifically with a continual ATIS broadcast and no options to tune to an alternate frequency. Its good to know the conditions at a given location but im getting the same info on continual loop for the whole length of a flight be it 20min…

I had this the other day, but just for a couple of minutes, not the whole flight. Thought it was what IT people call “Just One Of Those Things”.

That’s what ATIS is. A continual loop, changed about every hour or when significant changes to happen (like change in runway direction.) It sounds like your problem is that you don’t have a choice to change the radio in the ATC menu? I have seen that in various situations where it doesn’t allow m…

Hi When you say continual, are you hearing the ATIS announcement all the time irrespective of the frequency set….only reason I ask is that there is a bug reported where you get the ATIS text continuously being repeated irrespective of if you tuned the radio to a new frequency…. This is being inves…

Im hearing the same info continously from which ever airport i take off from until i land at another instead of new info from nearest or destination its always where ive taken off from i.e take off from Manchester and still receiving Manchester ATIS during landing at Frankfurt

Hello, Any kinds of posts like “Is anyone else having this problem?” go in Community Support. Your thread has been moved there.

Are you switching the channel to the new airport’s ATIS channel? If so, then this is a very interesting bug. ATIS channel is airport specific, so you need to change the channel (or what people call frequency sometimes, incorrectly apparently) as you approach your destination. I usually listen to …

I usually have the Atc done automatically by the copilot. Before the last update i would tune to local atis for weather and baro settings but now i cant stop the constant atis loop. I dont know how to turn off ATC as im on xbox (please dont judge me). Beforehand atc broadcast would change as flig…

I have had this problem in the KDCA area. There is an airport, I don’t remember which one, that was using the default comm 124.85 frequency. Tune your comm 2 to something else (I use 121.5) and see if it goes away. I didn’t see where you mentioned which plane this was in, but you may also have a com…

It was in various planes at various locations. F16, T45, G36, CJ4, C172. Locations = EGOV to EGUL KSUU to KNID EGCC to EDDF etc

Please don’t think I’m judging you at all. Ever. You can’t know what you don’t know. It sounds to me that there’s a problem with the Co-pilot. What two airports would be an example of where you’re flying? and I can go over how to figure out what channels to choose and how.

Perpetual ATIS loop

User Support Hub ATC, Traffic & NAVAIDs

SmotheryVase665 September 8, 2024, 8:17pm 16

Related bug: