Thanks for sharing. Great idea and well done…
I know it’s not really a cockpit picture but hope it’s okay to share, just finished printing most parts for the MCP now started the wiring, first off all ground wires.
Everything will be wired to a Arduino mega. Since this is something completely new to me I tested every switch and encoder on a special test setup and made a clear to me wiring diagram before soldering 100 wires and find out they had to be on the other pin.
Edit: to be as real as it gets I do everything with white wires.
All 3D drawings are from 737DIYSIM
Great looking project, keep those progress pictures coming.
Sweet. Are you going to use Mobiflight? I just hook up the switches and encoders to digital inputs and pots to analog inputs with the 5v and ground references. Mobiflight has a feature like MSFS where you can push a button to identify it, and then assign it. Way more simple than creating a wiring diagram.
That’s correct, I will be using mobiflight.
I record everything and will share it all in a separate thread later.
I posted here my 2DOF Motion VR Cockpit in 2023. Now I’ve completed my 6DOF Motion VR Cockpit! Here it is:
Details here
WOW!!! Looks like you have done a lot of custom work…AMAZING!!!
Thanks! Yes, it’s all custom. The only thing that’s off-the-shelf are the pedals and HOTAS. The MCP/GPS/AP box runs on MobiFlight, the rest of the control boxes and the pendular yoke run on custom Arduino code (Windows sees them as Joysticks/HID). Motion simulator part is driven by 3 x Arduino Uno R3 boards running SMC3 firmware that I modded for better 6DOF experience. Even the PSUs are modded to get 2 pairs of 2 x 12V server PSUs in series for a 2 x 750W 24V PSUs. Plus a single 450W 12V PSU to drive lights, fans and all 12V needs. It’s awesome and only cost me under $1000 to build, which is unbelievable because the cheapest comparable 6DOF off-the-shelf motion rig is $8000+ and has no controllers - but it took a lot of time to get right. Now that it’s working, I will add joystick/HOTAS configuration and a racing configuration with custom pedals.
Cray cray!!!
Are you some kind of engineer?
Not really, I’m more of a “renaissance man”
I know something about many things, and not everything about a single thing
We all stand on the shoulders of giants. Many people did many wonderful things that are widely available to use. Stewart Hexapod geometry, open source Arduino code with a joystick library (and its mod), SMC3 code, motion software, all kinds of hacks and know-hows.
I just compiled a lot of data, matched it all together, added a bunch of my own ideas, inventions and improvements and maximised the goal of building an ultimate experience for the lowest possible budget. Hence the wooden frame and cheap motors. But it works! A works amazingly well…
a fighter and a bard. A true Renaissance man indeed. Now back to the regularly scheduled programming.
Nice! how do you get the control panel on other screens??
You use Air Manager.













