Had Avionics die on me during approach into Tokyo Haneda. Couldn’t deploy flaps or Landing Gear.
The “Drop Gear” handle in the floor was a life-saver though.
My best guess is AAU1 had something to do with it.
Anyone else experiencing CTD when attempting to load at an airport with the Vision Jet? I didn’t have time to test further, but I suspect I might have a mod conflict somewhere thanks to AAU1…
Just checking either way.
Edit: figured out my problem. I still had the PMS GTN530 mod installed, and it was probably ancient. Deleting that fixed my CTD problem! I’m leaving this here in case anyone else happens to have old avioncs mods installed that they forgot about.
1 Like
No problems here.
1 Like
Move the Community folder to the desktop (or rename it where it is) and test.
I do not understand, the three screens below the pfd and mfd do not turn on while they light up in the TBM 930 What do i do wrong ? Thanks for your help.
They should once you turn both Batteries On. If not, you may have a conflict in your control bindings or a Community Mod.
1 Like
Thank you. When I disconnect my honeycomb, they light up by restarting the simulator.
Please make sure you clear out your bindings. Sounds like you have a conflict with you bat and alt switches.
2 Likes
I never enter my aircraft without removing the cover first. Due to spacetime requirements we deal with today, I always enter my aircraft from the outside. We can make lots of excuses, but, Asobo needs to enable click spots in the outside view, and allow us to drive/walk up to our planes and open the door and step inside…
Even better if they let us model FBO’s in airports (with standard FBO interiors so we don’t have to model the building, still haven’t learned how to do that,… sigh) and spawn into the FBO, create our flight plan with current weather along the route, and walk to the plane we want to fly on the tarmac 
(you could choose the plane when you create the flight plan like you do today so the right plane is on the tarmac)(but I really want the ability to switch planes on the fly within the sim without having to go into developer mode… Why’d they remove that??? (We had it in FSX))
Congrats on being the highest rated plane on the Marketplace!!! But…
Please, please! I hate buying planes from the Marketplace… well, anything! I was all set to buy this plane, until I realized it was only on the Marketplace.
5 Likes
Is it possible this is that Honeycomb constantly-send-a-signal issue, so the buttons are constantly being switched on and off a million times a second?
1 Like
If you have Flow Pro I threw up a set of toggles for the Vison Jet on flightsim.to that you can use to take the cover off and open the doors from external cameras and while power is off.
3 Likes
Cool! I’ll check it out!
Hi,
Im not expert at all and i randomly fly around without a real flight plan, mostly just sight seeing.
Normally i have been just finding an air port i want to land and using Approach in g3000 then hit activate.
However it is not showing up on my FMS please see screenshot.
You can see the run way top left corner
Hi mate,
LOC shows nothing also, i forgot to mention it.
Isn’t this the Vision Jet? That one doesn’t run the AAU1 version of the G3000.
1 Like
This is the Vision Jet - it doesn’t use the AAU1 G3000.
2 Likes
Thanks for your reply.
AAU1 is the latest navigation update am i correct?
Vision Jet doesnt have that update which is why the NAV isnt working? I also run Navigraph charts and its plugins do i need to delete my community folder to fix this issue?
Thanks
Disclaimer: I am a FlightFX Beta Tester.
Vision Jet has it’s own completely enclosed copy of the Working Title 0.7.8 Community Mod - you don’t need to have the Mod installed in your folder, it comes with the jet. The plan is to cut it over to AAU1, but the developer is awaiting documentation on certain items in order to migrate. NAV works on the Vision Jet as previously described - you don’t need to even be close to the track to get it to “jump” onto the flight plan leg. I fly the Production Version daily to help support questions for FFX customers.
4 Likes
Pls take a look at your PFD,
there is clear indication that your FMC needle isn’t there what can point to not compatibility with actual sim state. Very easy answer. Next possible reason about FMC needle is not to have actualy set some destination NAV source (Nav/Fix/Airport).
Very sry to say that but I’ve bought only Seneca (without G1000 type aircraft) and PMDG 737-700 and will not buy any 3-rd party because not compatibility after Updates again and again. This was clear to me long time ago that this will be problem and all is as I expected. My luck.
1 Like
Yes i see this,
I went to my content manage and removed my 3rd party planes however my NAV system just doesnt work. Doesnt follow a simple flight plan at all. Sometimes captures ILS then decides to climb and turn a 180 for no reason at all.
How do i reset everything back to default without uninstalling the game?
Thanks