I had some connection problems today possibly due to my own internet connection (FS said it disabled Bing data because of low bandwidth…).
This brought up the question of there is a difference concerning “robustness” against disconnects for the different methods (cloud, upnpn, direct). I always used “direct” up to now just because it was the only option in earlier releases (corresponding port is open). Should I change to cloud?
1 Like
I found having both players using a different servers fixed that for me.
1 Like
You have to switch Multiplayer to OFF. Because this means “Group only”, you also should make sure not to be in the same group. Then it should not make a difference on which server you are. If you are on different servers, you don’t see each other anyway, this is why it also fixes the issue.
2 Likes
Hello there,
a few hours ago i tried this addon with a friend of mine who lives in qatar (im in argentina) we had the same settings and everything was fine, same plane (DA62 and 172), same airport and parking spot with Multiplayer and Air Traffic OFF, the problem is, the only one who was able to fly the plane was him and not me, i did have the possibility to play around with the garmins but when it came the time to fly, if i moved my joystick he would not see the yoke move, also his plane froze every time he clicked the “Give Controls” bottom on the app… i did press the take controls thing in the program but he would not see the yoke move and the plane will instatly froze where it was standing or flying.
TL;DR: we were in the same plane, connected with the program but he was the only one who was able to move the yoke and throttle but if i did that with the take control thing, he didnt see anything move and plane freezes
any help?
1 Like
Sounds like the community package didn’t load in. Try manually removing the YourControls folder from your community packages and reinstalling.
@Crea808, I am using YourControl to fly with my son, we use the C152, most things work great. The one thing that doesnt is the heading indicator. It just doesnt seem to sync up. At times I see mine just continuously spinning slowly even in straight and level flight. We are using the MSFS_C152 performance mod. Could that have anything to do with it?
2 Likes
Thanks! 2.5.5 should fix this issue. Glad you’re enjoying it!
Any chance of the JustFlight Piper Arrow III being supported by this mod? My friend and I would love to do shared cockpit with this aircraft.
3 Likes
Just a simple ‘Thank you’. People like you bring so much to the community.
2 Likes
@Crea808, v2.5.5 did appear to resolve the heading indicator issue. However, updated to v2.5.6 yesterday, joined up a flight with my son, at first heading indicator worked properly, but soon after take off it just froze in place for both of us. We completed the VatSIM flight using the wet compass for heading information.
We are both using the jplogistics-c152 mod, and on VatSIM.
Also, I second the request for the JustFlight Piper Arrow support! That would be a great plane for shared cockpit.
Thanks for the awesome addon!
2 Likes
This is fantastic! I remember looking at this back in October, and it has definitely improved quite a lot since then!
I was able to get on with my friend very easily, at that point, we were able to do a flight, everything was very smooth.
I would honestly say that this works better than the FSX shared cockpit system worked. One possible bug (of it could have been a game bug), we flew in the TBM930, and when we turned on the battery, my friend could see all of the avionics screens, but I could only see the middle one. Luckily, this didn’t ruin the flight, since I was just flying as a co-pilot, and so my friend only really needed to see the information on those screens.
Anyways, I don’t know if that was a bug with my game, or a bug with a mod. I’ve never had a problem like that before with the TBM, so I assume it’s a problem with the mod. Anyways, this is fantastic, I can’t wait to see it continue to grow and be able to do better and better things!
2 Likes
Question:
considering I have the WT G3000 and G1000 mod installed as well as a Flightsim.to Improvement Mod for the TBM 930 (compatible with WT mod), should I need to tick the “default TBM” voice during YourControls install or not?
At the moment, if I install YourControls (ticking the TBM930 flag) the Improvement mod seems not working very well anymore.
Thank you and congratulations again for this fantastic Mod!
1 Like
Yup, you can download the current beta we’re testing right now from here: https://github.com/Sequal32/yourcontrolsinstaller/releases/download/beta/installer.zip
Glad you enjoyed it! Not entirely sure what could be causing the middle screen not to turn on - if you ticked on the Default TBM930 in the installer t could be that the modified default TBM930 is out of date with the sim’s current one.
1 Like
You should not tick the Default TBM930 if you’re using a mod
1 Like
It’s probably so, since before the sim update I had same mods and all was working nicely…
Ok, roger.
Thank you
please update to the new simulator version 1.15.7.0
Hey all. Firstly, I love the YourControls app. I have used it until today with no issues. After updating to MSFS 1.15.7.0 I started having sim crashes so I removed all addons from the Community folder and one by one added them back to determine what was causing the crashes. Unfortunately, it turned out to be the YourControls addon. Just wanted to let someone know so an update could hopefully be applied. Thanks in advance for your help!
1 Like
Currently it’s an issue with the sim. A lot of other addons that use standalone modules like Mobiflight, SPAD.next, AAO, or FSUIPC are suffering from the same issue. We can’t do anything except wait undo Asobo fixes the problem.
3 Likes