I slowed down YouTube to like 0.25x speed and then hit pause/play a bunch to read them….holy cow it’s a long list of fixes and improvements.
2 Likes
Anyone catch if it was mentioned or Amir has said anything about finally implanting headphone simulation directly into the plane vs the sim settings? I know this was asked a bunch on discord if we would finally see it with BFU.
This took a bit of time to piece together (literally) but the enthusiasm from everyone warrants it !
Fenix have brought so much positivity to the community!
**Avionics and Systems**
[2024] Added support for Modular SimObjects, including loading livery.cfg files with Fenix configuration options set
[2024] Added walkaround functionality for cargo doors
[2024] Added walkaround green and yellow hydraulic servicing panels
[2024] Added walkaround clickable chocks
[2024] Added walkaround mode support for cabin announcements
[2024] Added walkaround external refuel panel, including functionality for AUTO, MANUAL and DEFUEL/XFR modes
[2024] Added walkaround external power panel
[2024] Added legacy code readouts Added A319 Sharklets
Added new LCD screen overlay textures
Added new PFD and ISIS ground/sky colours
Added cargo heat to ECAM SD COND page
Added exit lights illuminating when cabin depressurised
Added custom aileron and rudder sensitivity curve
Added automatic connection of stairs and opening of door when spawning in
Added support for CPDLC handover messages
Added Fnx_adirs_type (0: GNADIRS, 1: ADIRS) and fnx_acp_type (0: classic, 1: modern) livery configuration options
Adjusted A319SL Pitch Moment during flap extension/retraction
Added cruise performance data for A319 SL
Added Lvar for weight unit L:CONFIG_WEIGHT_LBS
Added ability for old ISIS to be displayed on Sharklet aircraft (Fnx_isis_type = 0)
Added new default Navdata, cycle 2403 (thank you Navigraph!)
Added maintenance electrical bus
Added new livery configuration options for FLS, TCAS AP, LAT DEV scales, AC ESS auto switching, go around NAV
Added S_THIRD_PARTY_REFUELG for third parties to trigger the REFUELG ECAM memo for implementations that don't use our new refuel simulation
Improved flex temp unlatching logic
Improved OP CLB/DES behaviour, including fixing a system crash that could occur
Improved FD pitch changes in normal flight
Improved FAC GW calculations
Improved alpha floor handling during takeoff on certain variants
Improved aMAX load factor logic in non-normal laws
Improved FBW aMAX handling
Improved performance by reducing display CPU load
Improved and retuned aPROT activation and deactivation
Improved black outlines on some PFD elements like the Flight Director
Improved formatting of various pages in MCDU
Improved connection from Fenix systems to the simulator
Improved FBW ground law, elevator deflection, AoA protection and VLS protection factor
Improved livery specific setting loading. Now some settings are always loaded from the livery, and some settings are persistent (work will continue in this area) Improved cabin temperature simulation (more energy from equipment in the cabin, and improved mixing between forward and aft cabin)
Improved ground mode tuning Tuned rotation on A321
Changed default MCDU, DCDU and ISIS brightness
Changed default WXR GAIN and WXR MODE switch positions
[2024] Fixed interior lights not working
[2024] Fixed MSFS resetting the weights when entering/exiting avatar mode (might be fixed by Luke's fixes)
[2020] Fixed issue setting interior lights
[2020] Fixed doors and pushback tug behaving erratically
(2020] Fixed DX11 crash on exit
Fixed PFD speed trend showing below <30 kn
Fixed V/S needle colour during TCAS RA
Fixed chocks not being set based on aircraft ready state
Fixed LVR MCT FMA not showing Fixed SRS minimum flight path angle
Fixed take off data being overwritten when SEC F-PLN is activated during/after take off
Fixed E0 ATHR inhibit logic not resetting when moved out of FLX/MCT gate -more general
Fixed engine failure with no damage
Fixed AP using incorrect yaw target during engine out -more general
Fixed return button on WIND pages Fixed CRZ WINDS page hierarchy Fixed ADIRS "ON BATT" timing
Fixed IAE N2 and FF LBS/H spacing
Fixed squib DISCH light illumination timing
Fixed COMMERCIAL, GALY & CAB and AC ESS FEED switches not being latched
Fixed aircraft not starting with ready state when spawning on the runway
Fixed waypoint insertion at TO waypoint in SEC F-PLN
Fixed parking brake not being set on initial load in
Fixed potential crashes and memory leaks
Fixed PTU not being inhibited when Y ELEC is selected ON and cargo door is in operation
Fixed alignment of some vertical arm FMA modes
Fixed alignment of some ECAM SD ELEC boxes
Fixed glideslope aural sensitivity thresholds
Fixed erroneous bleed temperatures causing pressurisation spikes
Fixed offsets being available in SEC F-PLN when they shouldn't
Fixed offsets being available on non-PPOS waypoints
Fixed issue with preselected speed not being settable
Fixed long load ins on systems with many audio devices
Fixed beacon and seat belt signs not being on in ready panel state
Fixed GSX refuelling not working
Fixed ready states loading in with dead engines
Fixed ISIS not being fully initialised in the ready state
Fixed crash when a livery contains an invalid registration or selcal code
Fixed initialisation process, random annunciator lights should no longer be on after loading in
Fixed level changing to a higher altitude not immediately commanding CLB thrust
Fixed level change decreasing thrust in OP CLB
Fixed EXPED CLB not using the correct minimum speed targets
Fixed PTU behaviour with one engine shut down
Fixed conditions for FOB being amber half-boxed
Fixed CABIN PRESS MODE SEL switch animation being inverted
Fixed PTU inhibit timing after cargo door operation
Fixed cockpit door video not being on by default
Fixed potential crashes on systems boot
Fixed predictions when the flight plan includes a discontinuity
Fixed incorrect speed target on approach
Fixed crash upon loading an invalid STAR
Fixed VSW black pattern not being shown when it's maxed out
Fixed IAS data showing during cruise Fixed CI speeds in CLB and DES
Fixed display of managed speeds on PERF pages
Fixed potential crash on initialisation Fixed CAS/Mach crossover logic
Fixed manual autobrake disconnection not requiring equal or more pressure applied
Fixed incorrect white colour on displays
Fixed takeoff speeds showing on the PFD during rollout
Fixed slow systems boot in some cases
Fixed exception caused by too long aircraft registrations
Fixed stall warning (VSW) indication on the PFD showing incorrectly in alternate law
Fixed ADIRS TAS, GS and WIND values updating too frequently (particularly visible on the ND)
Fixed VERT REV --• WIND DATA "RETURN" button going to INIT A instead of back to the VERT REV page
Fixed P/D waypoints not working for runways
Fixed ALT/SPD not being yellow in TMPY F-PLN
Fixed GPS PRIMARY LOST being displayed at incorrect times
Fixed ACP volume adjustment not working when using the non-default audio devices Fixed NAV arming after MCDU reset
Fixed the whole flight plan being sequenced away when doing DIR TO RADIAL IN to FAF at MAP
Fixed FMA G/S justification
Fixed FMA ALT CRZ spacing
Fixed LS course missing on PFD
Fixed degree symbol being too small
Fixed XTRK error position when on ND PLAN mode
Fixed fuel transfer resulting in a fuel leak with refuel valves in NORM Fixed refuel panel HI LVL indicators not working on BATT
Fixed refuel bus not being affected by LGCIU gear position Fixed refuel target increments when using the rocker switch
Fixed MAN FLX not disengaging when going Into TOGA after takeoff Fixed SRS using E0 ACCEL ALT instead of the normal ACCEL ALT
Fixed VLS extension/retraction based on flap handle Instead of true position Fixed RETURN on APPROACH VIAS not going back to the STAR page
Fixed PFD yaw bar clipping outside the attitude indicator
Fixed departure and arrival waypoints not having their altitudes displayed Fixed the rate at which A/THR commands are processed
Fixed FCU heading reset value when IRS not aligned
Fixed altitudes in the MCDU not being rounded to the nearest 10 Fixed ILS2 not auto tuning for FMGC1
Fixed bearing pointer clipping out of bounds in ND ARC MODE
Fixed RAM AIR not showing the correct state on ECAM SD BLEED page Fixed incorrect avionics inlet valve position on ECAM SD PRESS
Fixed crash connecting to the simulator when it's not ready
Fixed case where navigation data would not be updated when switching between the bundled default and the latest Navigraph data
Fixed ISIS still initialising when loading "ready panel state
Fixed RWY TRK not engaging after take-off when there are no armed lateral modes
Fixed mixed approach symbology for FLS
Fixed gear doors closing after a gravity extension when there is no hydraulic pressure
Fixed SPEED SEL overlap with FMA border
Fixed clock date button being a toggle instead of a press and hold Fixed FCU dashed/dot behaviour when on the ground
Fixed PFD speed bug when managed on the ground with no V2 speed
Fixed FOB not being amber half-boxed when centre pumps are off on a non jet pump equipped aircraft
Fixed valve indications on the ECAM SD FUEL page Fixed track line vs airplane symbol draw order
Fixed ROLLOUT FMA not appearing correctly during landing
Fixed yellow electric hydraulic pump not continuing to run after consecutive cargo door actions
Fixed IDG disconnecting automatically above 200 degrees C Fixed CPC master not toggling after landing
Fixed ILS navaids not being de-selectable
Fixed incorrect air data source being used for ECAM permanent data temperatures
Fixed "download" button in the launcher not opening the Fenix Installer
Fixed DEPARTURE / ARRIVAL ATIS options being visible on networks other than VATSIM
Fixed conditions for WXR OFF showing on the ND
Fixed oxygen mask test remaining on when the button is held Fixed ENG OIL LO TEMP ECAM showing incorrectly
Fixed performance issue that occurred after a few hours of flying Fixed metric altitude on PFD during dual FCU failure
Fixed approach naming format (instead of "ILSZ23" it will now show "IL523-Z")
Fixed linked ILS not showing for all approaches on the MCDU Fixed RNP value not automatically resetting after a flight Fixed SDAC and FCDC symbology on the SD F/CTL page
Fixed alignment source not showing on IRS INIT page when aligned
Fixed reference position and GPS position showing post-alignment on IRS INIT
Fixed aligned position not staying static after the alignment is complete Fixed sideslip index being inverted when on the ground
Fixed FMS reference lat/lon not being updated on IRS INIT when activating a SEC F/PLN
Fixed LDG ELEV showing when in MAN mode
Fixed differential pressure being calculated if there is no source for static pressure (ADR 1+2+3)
Fixed FCU V/S being dashed when not in managed modes
Fixed F/CTRL SIDESTICK FAULT still appearing when a nullzone issue has been detected
Fixed LDG LT memo not appearing when the landing lights are being extended/retracted.
Fixed voltmeters not showing "88.8" during ANN LT TEST
Fixed incorrect engine label colours on the ECAM SD BLEED page Fixed multiple GPS ALT indications being rendered
Fixed A/THR disconnecting during temporary AC power interruptions Fixed centre pedestal fire buttons not being illuminated on LOOP A Fixed APU FAULT when loading panel states
Fixed glideslope reception range being too small for approaches like LOWI's LOC DME EAST
Fixed elevator locked failure not working
Fixed oil temperature updating too slowly
Fixed ENG OIL LO TEMP ECAM missing
Fixed EWD N1/EPR needle being too thin and needle draw order Fixed N1 red band missing
Fixed WINDSHEAR not showing on PFD
Fixed tip tanks arrow indication not appearing
Fixed standby frequencies changing on radio XFR
Fixed SEL indicator appearing when an RMP is not powered Fixed formatting inaccuracies on RAD NAV page
Fixed formatting inaccuracies on APPR PERF page
Fixed voltage drop from assumed current on depleted battery Fixed error caused by invalid printer configuration
Fixed changelog not showing in the launcher
Fixed latest public changelog not always showing in the launcher Fixed default state For COMMERCIAL and GALY & CAB
Fixed ND right VOR indication misalignment
Fixes to offsets, removed DF leg limitation, more graceful degradation handling
Fixed GSX stairs auto connecting when the user doesn't have auto select operator enabled
Fixed interpolation in V Speed calculator, resulting in inaccurate flex temperatures
Fixed potential crashes in various systems logic calculations Fixed some erroneous VNAV distances when using offsets Fixed level change not detecting flight idle thrust reached
Fixed level change not responding properly when in deteriorating conditions before thrust hit the desired condition, i.e., speeding up past speed target in descend, Fixed LNAV bank correction factor not being clamped for curved segments
Fixed FCC gross weight never being updated for WTF aircraft Fixed ADIRS digits not responding to overhead integral dimming Fixed sound contactor issue on engine shutdown
Fixed F speeds on A320
Fixed A/THR behaviour in banked turns
Fixed level change behaviour when at high pitch and bank Fixed MCDU brightness jumping to maximum
Fixed GA phase triggering at inappropriate times Removed SDS and rudder damping
**Art and Sound**
[2024] Added hi vis jacket & ELT model to flightdeck
[2024] Added LODs to all variants (A319, A320, A321) including cabin (4 months of work for Tom)
[2024] Added cabin interactions in walkaround mode
[2024] Added manual gear door extension handles
[2024] Added sounds to all interactable hatches and doors
[2024] Added emergency exit light logic [2024] Added cargo bay lights & logic
(2024] Added new cabin lights for all models
[2024] Added animation to exhaust turbine on IAE V2500
[2024] Added microscratches to the windscreen [2024] Added physically accurate readouts [2024] Added exterior LODs
[2024] Added missing standby compass decals [2024] Added moddy simobby
(2024] Added display brightness control on the art side, allowing more granular control and pop outs that are not affected by the ambient light sensor
[2024] Added better support for walkaround mode. It now spawns you in the cockpit, so you can walk into and out of the aircraft, along the aisle, and probably fallin • [2024] Added native windshield material with iridescent effect
Added new touchdown sounds (each gear is unique with samples based on touchdown rate)
Added A319 Sharklets
Added 3D AEVC sounds in flightdeck (as you move around you'll hear different vents)
Added ramper thump sound when connecting ground power
Added missing avionics contactor sound
Added entirely new IAE soundset with new recordings
Added IAE rear turbine windmilling sounds Added mid cabin, and exit calls
Added new AEVC samples inside and out
Added new cockpit TRU sample and associated spools
[2024] Improved stair textures
[2024] Improved cockpit glass
[2024] Improved panel lights
[2024] well done you paused the video and actually read all this. now, put 'BAe ATP wen' in the comments
[2024] Improved spoiler lever interaction
[2024] Improved mapping of PBs to utilise new FS24 material system
[2024] Improve fire PB emissives and glass (3D instead of 2D now)
[2024] Improved dome light realism (realism=5 now in dome.cfg)
Improved flap handle interaction - it now stops at correct detents
Improved PTU volume
Improved IAE thrust reduction sound
Improved behaviour of INT/RAD switch in lock mode
[2024] Fixed winglight not illuminating outer wing and sharklet
[2024] Fixed and improved clock display textures and colours
[2024] Fixed missing cabin glass elements [2024] Fixed fuel panel and RAT mapping [2024] Fixed IAE black latches
[2024] Fixed missing VFX (e.g. heat blur, touchdown etc)
[2024] Fixed A321 Overwing Exit cabin gap [2024] Fixed circuit breaker decals
[2024] Fixed pilot seats not centred in the forward/flying position
[2024] Fixed missing Cockpit Door Video OFF annunciator
Fixed various sounds across all variants Fixed double triangles on exterior fuselage
[2024] Large improvements to CB's, including reduced vertex count and optimised textures
[2024] General performance optimisation all around the flightdeck
[2024] Large improvements to CB's, including reduced vertex count and optimised textures
[2024] General performance optimisation all around the flightdeck
[2024] Reworked flightdeck lighting since shadow-casting method is kill in 2024
[2024] Reworked tooltips
[2024] Fixed emissive texture bleeding on PBs
[2024] Removed highlights in FS24 locked interaction mode [2024] Fixed A319/320 flaps animation causing clipping [2024] Overhauled flightdeck textures
[2024] Fixed registration panel showing black text [2024] Fixed contrail brightness level
Fixed WXR GCS switch not being spring-loaded into the AUTO position by default
Fixed ECAM/ND XFR incorrectly having "3" under CAPT and F/O on the switching panel
Fixed missing ground roll sounds in cabin
Fixed CFM windmill volume too low
Fixed roll sounds at low speed
Fixed volume of auxiliary sounds in exterior view when engines running
Fixed touchdown/roll sounds being audible passing 100ft in certain circumstances (e.g. FSiPanel/replays)
Fixed AEVC spool-up sound activation
Fixed fuel pumps not making noise in the exterior Fixed IR pbsi's missing tooltips
[2024] Fixed pushbutton switch emissive blending
[2024] Added inside/outside sound transitions + walking sounds
Other sound improvements and fixes to packs, cabin/galley sounds, gear sounds
[2024] Exterior window micro scratches
[2024] Added draggable fan blades
[2024] Added armrest raising and lowering when entering/exiting avatar mode
Added contactor sounds for COMMERCIAL and GALY & CAB [2024] Improved glass decal opacity
[2024] Fixed cabin glass draw order
[2024] Fixed strong reflections showing on cabin glass
[2024] Fixed ELEC HYD not audible under certain circumstances [2020] Tuned emissive constants for readouts
Fixed roughness on cabin wall
Fixed smoothing group issue on latched switches
[2024] Fixed shadows casting from decals materials on fuselage
Added window blind/visor sounds, bulk cargo sounds, and new battery contactors
Fixed missing stop sound on FO seat pitch adjustment
[2024] Added sounds for FAP cooling fan, maint bus transformers, batteries
[2024] Added main panel flood lights and housing
[2024] Fixed sun shades causing flickering when viewed at an angle [2024] Fixed landing light effect being pixelated
[2024] Fixed various cabin holes and material issues [2024] Fixed carpet texture stretching
[2024] Fixed DDRMI VOR integral light
[2024] Fixed engine start switches not being round enough [2020] Improved display contrast and colour matching
Fixed pilot seats making electric movement sounds when the aircraft is unpowered (bigger improvement to seat power/movement coming after BFU)
Fixed EMER CANC brightness not being tied to pedestal integral knob
[2024] Removed default ground services
**EFB**
[2024] Added LIDO charts and the ability to switch between simulator and Navigraph charts
[2024] Added native EFB app
[2024] Added FCU readouts setting
[2024] Added ACP and ADIRS type configuration options
[2024] Added ability for the charts app to remember the most recently used charts source
Added ability to set Windows process volumes using the ACP knobs Added custom refuel rate setting
Added full aircraft model name in status bar
Added ability to reboot the EFB by holding the physical home button for 5 seconds
Added the ability to set THR RED/ACC/EC ACC altitudes to any altitude
Added stop margin to the take-off performance output. UI is still a work in progress
Added a clearer error message when a take-off solution is not possible for the input configuration
Added take-off performance data for the A319 with CFM56-5B7 Including accelerate stop distances
Added colour picker and thickness tool to chart drawings
Added interpolation between elevation and runway length data-sets to fine-tune performance figures to the actual runway length rather than being rounded to the Added new take-off performance data for all variants including stop margins. Performance calculations for higher elevation runways will now be more accurate, Added a reset button to charts to clear the current drawing and reset the charts position
Added option to use the simulator as the METAR data source for the EFB
Added viewer for custom PDFs in Pilot Brief app
Added ability to disable virtual ACARS messages (delay codes, etc) Added Additional Centre Tank (ACT) count to the status bar
Added automatic weight unit switching when importing a flight plan from SimBrief
Added EFBs sleep when loading in Cold and Dark Added charging popup when plugged in
Added persistency for chart drawings when closing charts Improved switching between pages in charts
Improved size of app icon sizes in hover navbar
Improved the failures page to better reflect current system status - highlighted green, orange or red based on the failure states
Improved aircraft configuration option loading/saving [2024] Fixed map layers not working (restored Leaflet) Fixed cargo door controls being accessible when the doors are in operation
Fixed fuel and ZFW sometimes being incorrect until switching pages
Fixed map not reappearing if the user has a chart open then restarts the charts app
Fixed arrival runway not persisting in landing calculation app
Fixed sim settings not being updated unless navigating away from settings app
Fixed status bar text wrapping when it's too long
Fixed the status bar showing on pages where it shouldn't (like the Web MCDU)
Fixed weather information disappearing after reopening the Fenix app Fixed broken base map for non-Navigraph users
Fixed route disappearing from the map after changing layers Fixed starred/all chart button text not being centred
Fixed map not automatically centring when the aircraft initially loads Fixed weather data not being scrollable
Fixed "no take-off solution could be found" in certain conditions
Fixed thrust reduction and acceleration heights showing incorrectly on take-off performance page
Moved sidestick nullzone fault ECAM warning to the EFB as a popup instead of polluting the ECAM with fictional messages
Clicking links in the EFB from within the simulator now open in the PC's web browser, e.g. Navigraph auth URL and knowledgebase links
Fixed checklist so that you no longer need to scroll down to view all sections
Fixed take-off performance sometimes not calculating when OAT is low
Fixed invalid MSFS METARs being processed, e.g. wind -238457234570235782358
Fixed selected airports in the sidebar disappearing when navigating back
Fixed starred charts not preserving the chart colour Fixed EFB status stuck in the preflight state
Fixed document page number not clearing when clicked
Removed loading placeholder when navigating through pages in custom documents
[2024] Fixed map not appearing for non-Navigraph users
Fixed arrival calculations sometimes computing for the opposite runway and showing incorrect winds
Fixed missing hover state for PANEL STATES button Fixed charts re-pinning when re-entering the charts app Fixed duplicate "aircraft loaded" popups
**Flight and Engine Models**
Added CFM56.5B7
Added A319 Sharklet airframe variant
Added new ground model
Retuned FBW on all axis
Retuned rudder inputs
Retuned ground effect and Flare sensitivity on all variants, on a per variant basis
Adjusted ground-idle and low N1 thrust output when on ground for better taxi dynamics in conjunction with new ground model Adjusted autopilot integral gain on pitch axis for smoother disconnects
Adjusted suspension params on modern suspension/gear model for optimised boing.
Fixed certain engine module hyperactive oil pressure fluctuations
Fixed flap 3 drag too low on certain A32X variants, causing idle approach w/ gear down
9 Likes
Mate tell me about it.. looks amazing..
Before you know it, we will be buying these planes purely for simulating ground crew, loading and refueling the planes and not even fly the thing 
What did you do on simulator last night.. oh i spent 80 bucks on the a320 just to be ground crew
4 Likes
Obviously, would be great if you could actually find some failures/problems this way… 
I have no idea what you are trying to say but the Fenix simulates many failures with working circuit breakers some included in the video they posted but most likely you did not watch.
1 Like
The discussion above was about the walk-around and roleplaying the ground crew.
So spotting failures while doing it.
Well the above post to my post that is a Asobo limitation not Fenix. Get facts straight. They can only work with what they got.
I’m thinking of forking out the money and moving to Fenix A320 from FBW and the iniBuilds built in one in FS2024. I use a Meta Quest 3 and have a 5080 GPU.
I’m hoping the Fenix has better mouse control in the cockpit. In FBW, the pointer seems to hover far above the controls and buttons. And it’s hard to click things. Also, I’m still not even sure how to pull and push autopilot knobs to toggle managed. And I have engine start issues. (That one may be user error).
Is mouse pointer issues a thing in the Fenix? In the iniBuild, it’s way better. But the sounds and EFB are not that great.
And would I suffer frame rate drop with the Fenix? I heard it’s more demanding. I really want to get it but would be bummed if I had the same issues.
All I can say is go for it..
I’ve flown VR in the Fenix a lot for the past months. I’ve found it no more demanding than the PMDG 777 and the iFly 737 Max which I also fly a lot.
After release of the BFU though well who knows but all I can say on that is that I have more faith in Fenix than all the rest bundled together. I’m confident it will only get better.
9800x3d 64 G RAM RTX 4070 ti super Quest 3. It should absolutely “fly” with your 5080..
And no there is no problem with click spots with the mouse unlike the iFly which is a real pain in the …
3 Likes
Sold!!
Thanks!
1 Like
LET’S HAVE FUN !!!
(Quoting Aamir from discord)
“@everyone thank you so much for the love, the reception the video received is insane, and testing has gone well, so I’m very happy to say BFU has been pushed a little early (but still late!) and is available for all customers now. details, changelog, and a little bonus video is available here: Fenix Simulations”
9 Likes
My WinWing hardware FCU+EFIS+MCDU doesn’t work with the SimAppPro software.
Is anyone working who’s using mobiflight? If so can you direct me to where I can get the necessary software software that works? I know I tried to install it once before some time ago but failed miserably.
Thanks
3 Likes
Noticing this as well. Neither is PU KOREA’s light panel peripheral. I’m assuming software updates for these peripherals are going to be released imminently, but considering bringing these mappings into SPAD as well just to future-proof it.
SPAD sounds like a good idea but I’ve no experience of that either. These things tend to be far from intuitive for a numpty like me. Unfortunately I need to be spoon fed when configuring these things. So if there is a website or youtube video anywhere a link would be most useful.
A potentially stupid question but .. the liveries now accessed through the Fenix app (think it was the app not in front of PC right now). It says FS20. I take it these are for FS2020 not 2024? I see you you can select 4k or 8k.
The liveries are on the Fenix installer. There’s a load of them and each has an install button for both 2020 and 2024
Ok thanks I must have missed that I’ll look once back in front of the PC.
When i taxi out my screens (except efb) all go black… like the power shuts off? But both engines are on?
And do i need new simbrief profiles?
For the rest, looks and feels great!! Well done fenix team
And also hardly any fps gain