Then how do you know where the idle position is? Purely visual? Like this, it is easy to make a mistake and go into reverse instead of idle. Unless I misunderstood your explanation.
My TQ has a physical detent. So I move the lever to that spot, then adjust the sensitivityNeutral point to match that, on the horizontal line. For me that is 59 for throttle one, and 62 for throttle two, as there is a tiny bit of assymmetry I canāt eliminate.
For non-turboprops that point then becomes the idle position.
What TQ is this out of interest?
Virtual Fly TQ6+. Outside of its construction there is nothing special about it.
Thx. Thatās a nice unit. I like metal construction and itās why I considered one myself but I think Iām going to upgrade to the Fulcrum TQ when itās released. It should have all the TQ6 features but with angle adjustment, changeable handles and Iām expecting a lower price too.
1 Like
Virtual Fly have a sale on at the moment apparently, and itās ā¬539.
I use the honeycomb bravo and I have put my hardware reverse thrust on the F2 key (decrease thrust). The bravo doesnāt see the point below idle thrust as part of the lever, but as a button. It works for me. Whenever I put it there, it keeps sending F2 and hence it goes to maximum reverse that way.
I have tried that, but it takes too long for the reverse to engageā¦ for a short field landing it does not work well, otherwise it is a pretty good solution.
a joystick gremlin macro maybe ?
Thank you a lot for update and very quick respond!
1 Like
Sure you can do!
1 Like
Thatās only possible in the 3D model.
You only can adjust the color.
I donāt see that Asobo has changed something like this within SU7.
This mod just includes all changes which came from SU7. So if this should be fix especially on this plane, than this mod should do just the same.
And I even donāt know that there where a option which could be set for
Iām a bit lost at this moment and itās not a problem with the mod but maybe the specialists can help me out or guide me to a solution. I must say I havenāt flown for 2 months so I got a huge update.
99% of my time I fly the C208B so there I noticed the problem; when taxiing, the plane doesnāt go left or right. The steer turns though, however the plane keeps going straight. The only way turning works is when the Assistance options are completely set tot EASY, change one thing and I canāt turn. Tested other planes, no succes there either.
I hope someone knows what setting I can try because when set to EASY it works but anything else, even the slightest change, messes up the steering.
Flight model set to Modern, not Legacy? AI pilot disabled?
The flight model is modern and no AI pilot.
Are all the planes doing it? You may want to try resetting your brake & rudder axis or buttons.
What I did is check the rudder axis(right,left,elevator and ailerons) all empty.
Aileron left - Num 4
Aileron right - Num 6
Center Ailer Rudder - Num 5
I cleared all the other values where these input keys also were. Unfortunately, althought the ailerons and the steer itself do turn, the plane doesnāt turn.
Hello, its been a while since I used the caravan but I cant find a way to get rid of the pilot haw can i do this?
Regards
Cycle to external view than back to cockpit view. That seems to work for me when this happens.
1 Like