I think you have to restart MSFS. Otherwise it will come from the memory…
Has anyone manage to get Asobo´s generic GA planes to working with ELT? I want to fill my skies with asobos generic “light for fps” aircraft (Asobo-aircraft-generic-piston-multiengines etc etc) and injected by ELT but only for GA flights. But i havent figure it out yet. I have modelmatching and @Mauflo12961 did confirm, it looks ok. But still im getting flyable C208 flying as AI GA flights and it isnt light for FPS.
Here is my modelmatching file attached.
modelmatching_for_GA_PLANES_ONLY.txt (9.0 KB)
“Generic Piston Single Engine” will not work. You should use the name that is given in the aircraft.cfg file after the “FLTSIM.0” tag.
ec. Cessna 152 use
[FLTSIM.0]
title = “Cessna 152 Asobo” ; Variation name
Here is aircraft.cfg of “Asobo_Generic_Piston_SingleEngine”. As you see, "title = Generic Piston Single Engine Asobo 00 "
So do we need to add that "Generic Piston Single Engine Asobo 00 " to the modelmatching? I actually did it and same outcome that earlier with “Generic Piston Single Engine Asobo”, without 00 at the end.
There is no point to use Asobo_C152, because it hasnt been optimised for AI, it is flyable model. That´s why it would be very important to have these GENERIC´S working with ELT. But it is very hard to make this happen my self.
I’m actually sorry but that will not work at the moment. So if you want to see the correct aircraft in ELT you should use the “Asobo” version of the similar aircraft from the aircraft.cfg file. You will find the correct aircraft.cfg files for the installed aircraft in the “official” folder of your MSFS installation!
OK, i did get it working. Only [FLTSIM.0] entries work. For example i cant get this working:
- [FLTSIM.1] “TBM 930 Asobo AirTraffic 00”
But i did get this working:
- [FLTSIM.0] “TBM 930 Asobo”
So with editing model.CFG:
[model.options]
; if true, when showing the exterior, also show the interior model (default false)
withExterior_showInterior=false
That model injected by ELT, is showing without cockpit/interior, so i will not get too many FPS. I did just spawn lots of C152´s around Florida flying low alititudes from FR24 data. But i am still getting some airliners to the airports, so i need to add airliners to that modelmatching file and make then invisible with invisible model. I think it can be done with 3rd party addon aircraft´s model.cfg.
Downside is, that if i choose to use Asobo´s C152 as a GA aircraft, i have to manually add [FLTSIM.1] entry there for a flyable aircraft. It would be some must better, that i you could build new version that can read [FLTSIM.1] entries also, not only [FLTSIM.0] entries.
here is image of C152 without interior as a GA AI TRAFFIC PLANE.
edit. Ok, so as for the spawning airliners, it will use airliners from community folder or official folder. I have only Headwind A339 installed, so it will spawn with them. Here one solution, delete all the LOD files and it will be invisible. But yet again, you cant fly with it.
edit 2:
So with no single one airliners in community, ELT wont spawn airliners… only GA aircraft from community, like this:
edit 3:
Here is video, what i did: https://www.youtube-nocookie.com/embed/J-4j_eeDePM
Sorry I can’t follow your intensions! What do you exactly want? The ModelMatching.json file has only one sense: To show the correct model matching. Not to show or hide different airplanes or traffic. If you don’t want to see other traffic than GA then exclude the other!
You also have the chance to show different liveries for the same model if you use the different names for the same model.
Like:
“Cessna 208B Grand Caravan”:“Cessna 208 Livery 1”
“Cessna 208 Caravan 675”:“Cessna 208 Livery 2”
instead of
“C208”:“Cessna 208 Asobo”
So it is possible to create many aircraft of the same type with different patterns without changing their cfg files!
Hi there, no need to be so rude. I want to make you mod better.
I want to use you mod to inject only GA aircraft. But when i exlude airliners, it will still inject airliners. You can test it yourself in USA. Thats why i need to make those models invisible, because FSLTL or AIG is purposed to handle airliners in the groun and in the air, because your addon has that 5sec sturrer on the ground.
And as i told your, you addon doesent inject [FLTSIM.1], [FLTSIM.2] entries, so that Cessna 208 Livery 1 wont work, if it is other than [FLTSIM.0] entry. And normal “untouched” Asobo models arent best for FPS, when used in AI traffic. Therefore they need to be forked (lod settings etc)
Currently i am forking free GA models from flightsim.to (bacause i dont want to fork Asobo´s models, because people want fly with them) and if i succes with it, i will ask model dev´s permission to make them as a zip-file and instructions to use them with ELT 3.03. Hope you understand, i see lots of potential with you addon, when we only need GA aircraft´s the the sky along side FSLTL`s injected airliners.
Happy New Year and sorry if I seemed rude. I just didn’t understand what you wanted exactly.
OK The problem is that GA aircraft can only be identified by the airline designation. So if an aircraft is not assigned to an airline, it will be displayed naturally. In this respect, the idea of not displaying the aircraft if they are not GA aircraft is of course quite understandable, although not very efficient.
Probably it would be better to specify in the “Settings.json” file which aircraft types should be excluded. Currently you can also exclude air traffic at a certain altitude. But of course aircraft are displayed even if they are on the ground and are not GA types. I will think about a solution, especially since I am a GA pilot myself and can understand your wish!
I was able to model match glider but not succeesed with helicopter, even that you have manual in pdf but it crashed with that model matching lines.
Basicly i need complete modelmatching .json where is for example
“C208”: “size M single piston”,
“Cessna 182”: “size S single piston”,
“Cessna 550 Citation Bravo”: “size M business”
“King Air 350”: “Twin piston”
I will find and edit models for it and ask model devs permissions te test in beta and then maeby publish as “non flyeable AI models”. First test are good only with messing with model.cfg and disable all the effects. Easy task and FPS isnt the problem.
So i need every help i can get, if there is ready made modelmatching files for airliners for example from FR24 data. We need those also, because ELT is trying to inject airliners also even that airliners are exluded.
when this is ready we have
a) ELT injectinc GA traffic to the skies
b) FSLTL injecting airliners to the skies and the airports
This is going to be awesome when finished. I need some help with this, modelmatching need lots of work, i dont have. My goal is use freeware models from flightsim.to to test this (like in beta) and if this theory works, i wil contact model devs and discuss can i publish these “modded, light fps” versions in one single pack.
If you are interessed joining to help me, here is discord link to my server and there is own topic for this work: Discord
You can follow my work here:
https://www.avsim.com/forums/topic/628779-ltm-ga-traffic-with-elt/
First teaser video of GA mod (with ELT): https://www.youtube-nocookie.com/embed/7zBCSpPXo4s
Is there anyway to get this working again?