How to adjust Ground Handling *Config file edit*

[OneRobertOne]

With the excessive weathervaning that’s been here since launch and the new SU10 ground handling update, it’s getting pretty difficult to properly simulate a proper ground role in a light GA aircraft. I was looking to adjust the ground handling cfg file. I read somewhere on here yesterday where someone gave their recommendations but I can’t seem to find it now. Many thanks if anyone can point me in the right direction.
BTW, SU10 is running well for me and I think it’s an improvement visually so thank you Asobo.

edit

In case anyone else is interested, I found the original thread, see here:

SU10 Cessena C172 G1000 Rudder Control and Wind Gust

It’s due to the new crosswind tuning added to the 172, since you’re on PC there’s 2 ways to fix this depending on your preferences. In the flight_model.cfg file go to [FLIGHT TUNING] and either change ground_crosswind_effect_max_speed ground_crosswind_effect_zero_speed to read ground_crosswind_effect_max_speed = 85 ground_crosswind_effect_zero_speed = 5 to cause the wind to gradually be applied to the plane as you build up enough speed to gain sufficient rudder authority. The other option…

I’ll try both solutions tonight.

[airmanparker]

I was the OP in this post but have not had a chance to try it yet.

[OneRobertOne]

Tried both, helps a bit but the problem is the grossly overexaggerated weathervaning. A 5kt crosswind makes it nearly impossible to control realistically. I need to find out how to dial down the weathervane effect.