Ok, thanks, i’ll check it 
Thanks!!
1 Like
That is my experience as well. Bought the plane a few days ago and rudder (on the ground) is sketchy at best. So please fix cuz I love the A10.
1 Like
I did a little more troubleshooting today. While taxing as soon as the NWS is disengaged the rudders stop working while until the wheels leave the ground then they work again. Same with landing, as soon as the wheels touch the ground the rudders stop working until NWS is engaged. This can easily been seen in the external view while taking off, as soon as NWS is disengaged the rudders go straight even though there is input from the joystick (and checking the internal view the pedals are moving). Hope this helps.
3 Likes
hi, can you give me an opinion on the A10 by Deimos inc, from the videos it seems there is an autopilot, can FMC be used for flight plans?
thanks
Fartoolong, that was amazingly cool!. I bought the a10. I’m struggling to keep it centered on the runway. It wants to veer off… Also, how do you do the flybys? I’d love to be able to learn that trick too… very cool! Thanks again, Jerry
1 Like
Hello. Make sure you have the latest updated A10(content manager) as the dev updated that issue you mention.
I used an Amazing free add on called Skydolly. I personally like this one the most as you can individually fly the aircraft in formation, which to me is more of a fun challenge, however there is a newer add on that has a free version called Air Assistant. That is a much easier way to do a formation fly over as you just fly one plane and the others are all set to mimic your moves. Easier, but to me not quite as rewarding.
It’s fairly easy to install and get right into it. https://flightsim.to/file/9067/sky-dolly
I updated the A10 last week but still encounter two problems I have had before. One is that I can’t extend landing gear before landing. I use a controller, but neither the D-pad input of manually changing the lever in the cockpit extends the landing gear. When taking off the retract properly using the D-pad. The other problem occurs when I have the auto trim setting on, but the aircraft continuously whant to gain altitude. Sometimes really quickly. I sometime try to manually change the trim using the controller, but it always reverts back to wanting to gain altitude. Is this a bug or a characteristic of the real life aircraft?
@DeimoS987 is it possible you can have a look at these apparent bugs? Tested today as well after the most recent update to the aircraft and have the same issues. Thank you.
I have searched. is there a manual for the A-10