PA-28R Arrow III from Just Flight

There’s a brand new update … trim is fine and the window latch works again.

I notice that too and said earlier that the Arrow seems to porpoise according to the instruments but not sure if the aircraft is actually doing that with the HSI swinging between up and down a thousand feet per min ( trim wheel is stationary) and also the artificial horizon indicating it is.
Tried various power settings and autopilot on and off

I am doing my second flight of the morning now and it seems to be fine now. Wonder if it was something in the sim this morning.

Always had an issue controling this plane on the landing/ flare with an xbox controller. Does anyone else notice how jerky the response is nearing stall speed?

Your suggestion above ,a few days ago, worked perfectly using the Piper Arrow 3, EGNR to EGNH on IFR low altitude and I thought this was a fix until the known bug is resolved. Yesterday and today it just does not work at all doing exactly the same thing on the GNS530. Nothing has changed but now it is behaving the same as the TIMECLI problem on the GNS530 not following a GPS flight plan.
Oddly I tried the AI Flight Assistant on the same route and it did all the waypoints, navigation and altitude changes perfectly which was really annoying until it landed half a mile short of the runway to cheer me up.
As I have not changed anything is the GPS Nav system dependent on the Servers ?
Also a simple ILS approach into EGNH which always worked does not capture the localiser no matter how well I coax it on to the height and heading.

Not sure. I was yesterday flying in the Community Fly-In where the provided PLN file was set up as VFR and the sim added these TIMECLI and TIMEVER waypoints as well.
I opened it in LittleNavMap, changed type to IFR, saved it and loaded into the sim, and it worked just as expected, no aritifical waypoints.

You can try it yourself with the flight plan provided here:

Well, that depends on what you mean by that.

If what you’re saying is you lose elevator authority as you approach stall speed, try adding some up elevator trim. This will give you more elevator control so you don’t land on your nosewheel. It happens in the real plane, too, but not quite as pronounced.

I’m having a hard time with the plane wanting to bank left.
I can live with it on high power takeoffs, but even while cruising I need 8-12 degrees of right rudder trim to keep the plane somewhat level.
I’ve balanced fuel load and copilot weight ( can’t see the copilot in the cockpit view though, think that’s a known issue).
I play with a joystick, so holding it in a bank right configuration gets tedious on a long flight. And the AP has some issues too, so I don’t dare rely on it to not kill me.

Also, the oil temp seems to change way too quickly. From cold and dark to working temps in less than a minute, and going back to idle the oil temp drops really quick. It’s like the engine has only a deciliter of oil in it.

Yeah, I’ve also noticed that the rudder trim has become less effective for balancing out the left rolling tendency recently. I don’t know if that is a result of SU5 or a change in the Arrow.

Meaning you need more right rudder?

Yep.
When I’m alone in the plane I need quite a bit of right rudder to keep the wings level.

Currently flying with a fully loaded plane, and perfectly balanced fuel and passengers, and I’m actually not having any rudder trim issues. I’ll try again with a light plane when I land in an hour.

Maybe they’ve tweaked engine torque? I have most of the versions they put out, it’s down to whether I could be bothered to extract them all to compare files. :wink:

There is definitely an issue with the effect of the weight of the Pilot and Passenger on these aircraft.

I’m a big guy, flew many hours in the PA28 solo and didn’t experience this ‘banking left’ phenomenon at all.

Does engaging the AP sometimes give a violent left roll and dive towards the ground.
By the time you disengage it you are probably upside down.
I find it happens in the Arrow but not in the Cessna so is it a base sim problem or not ?

I’ve just had a wonderful flight in the French foothils … and the plane is performing perfectly.

Have the same issue (in my case it was the Turbo IV). I then turn off AP and cycle the Coupler through all modes left and right and turn HDG off and on. This resets something and the AP works well again.
Later on it reappears and the same steps recover it again.

Reminds me , my Flying Instructor said ‘it is not a plane , it is an aircraft or an aeroplane.’
A plane is a tool used in woodworking.

Hi guys!

Since a while I’ve noticed something very odd in the behavior of the Piper while rolling during T/O, I guess that I’m not the only one to feel bugged by this strange phenomena which is that at around 55/60 kt before VR the bird has a tendancy to turn to the left brutaly (no matter what?!) as if a strong gust wind hit it, and that made my Piper grounded since a while even if I had hope that it would be fixed with the last update but still…

I don’t see users complaining about it so that has anybody found a solution to get rid of this terrible bug that I have on my side which ruins my experience so far?

Thank you! :wink:

Would you rather I say Flugzeug?

A Flugzeug is the pilots Werkzeug.