Cheaper!! 
2 Likes
Ok, so tried using it with the new 18hz setting, I could not change the 18hz it was stuck on that setting for me, the results were me sadly the same but again we know its the API, ill keep plugging away at getting other settings done in the sim, plenty for me to do right now!! Thanks either way Oliver
1 Like
Did you try using the mouse wheel while hovering the cursor over the number?
But anyway, I think the adaptive refresh rate is the way to go. And individual profiles for the panels per aircraft are required too.
3 Likes
Ok so do we set that up per aircraft Oliver or you will write that in to allow that to occur automatically for each aircraft
Umm ok…so I had to go back into the sim, way past my bedtime but the curiosity got the better of me and I mouse over’d the Mhz rate and changed it to 1 and ummmm.
I am running Track IR and two panels and ummmm, I am having zero stutter, as if there is no issue whatsoever, I am a little taken a back here because my panels, track ir and the sim are working perfectly!!!
Disclaimer, the only thing is the Desktop FIPS are essentially at 1fps but in the sim its really good! amyway wayy past bedtime lol, thanks folks, that Oliver awesome work!! 
4 Likes
Same here, My Flight Instrument Panel works perfectly well on P3D and previously on FSX without having to use SPAD.next and given the steep price of the hardware, I would expect to get a manufacturer integration with MSFS 2020. Moreover, I would not spend more money on Logitech gaming products if they do not bother to support this simulator, which they had months and months to prepare for.
2 Likes
This all depends on whether Logitech were told that the products didnt work ahead of time during the pre release time frame. If they were told and did nothing, terrible. but if they didnt know either through NDA, testers not being able to inform logi or just a communication breakdown between companies or whatever reason, then you have to give them time to come up with a fix.
1 Like
I’ve been trying to use Saitek radio panel with MSFS. The logitech radio panel test software shows functioning lights and functioning switches. I installed Axis and Ohs, made sure I had all the requisite windows components, followed the user manual, made the connection, enabled the radio panel, etc. The software shows connection with the SR22. The radio panel is completely dark. I’ve played with the master and avionics switches. Both Garmin panels are lit in the Sim and functioning but the Saitek radio panel remains dark. Can anyone suggest why and what to do?
Doug
Have you done the EPM fix for the USB for that particular panel.
You can do it through Lorbys AaO, but you have to run the app as an admin, and make the changes under tools and reboot.
Regards
1 Like
That was the answer! I didn’t see that in the documentation I downloaded for the program. Thanks for the advice.
Clean the trash can, lol
I installed the latest issue of Lorby, it took quite a while for the main window to show, then the simm crashed, Lorby kept going, I could see the menu where the Saitek Panels are seen and configured, and that was all…btw the free use has no limits at this moment
1 Like
lorby crashed the simm for me
1 Like
So sad, just brought Flight Multi panel to add to my Yoke, came home plugged it in. checked site for drivers - hmm 2020 not mentioned, powered up Sim - nada.
Logitech really disappointed me, why should I expand my system if they can not support the products.
to see people with thousands of $$ worth of extras show Logitech is failure.
1 Like
Reach out in this thread. The dev has been giving free and excellent support so far. Microsoft and Logitech should be taking notes. (Also, hey, it’s OP! You’re famous 
)
@LorbySI has kindly provided a free demo for us to use while SimConnect is broken. Once it is fixed, he might justifiably ask for some compensation for all the technical support he’s been giving and to further develop the program 
Friendly reminder to everyone: petition Microsoft to fix SimConnect and to get our panels working so that 3rd party devs can concentrate on other things than trying to fix their mistakes, and we can concentrate on having fun with the sim.
2 Likes
I did few test running MSFS along with the 4 legacy versions of Simconnect, P3dv4.5.14.34698 is also installed for VR and Choppers (FYI).
- MSFS2020 alone: 45 FPS
- With GFDevFSX.exe: 42 FPS
- With GFIT for the MCP: 41 FPS
- With Lorby AxxisandOhs_1_57_b06: Saitek Radio ARE NOW WORKING: 39 FPS
- With Littlenavmap: 31 FPS
- With Littlenavmap (Sim aircraft update at LOW, without Fletch any AI or Multiplayer aircraft, vehicle or boat: 35-37 fps)
- Did not test Aivlasoft EFB v2, but I expect even lower FPS with there dual apps running in ‘Trojan horse’ style…)
- I Can’t imagine what the PMDG FPS will look like…
All problem found:
- A lot of input Lag from all USB components, every input action are delayed.
- Major mouse lag, I feel like a Windows Remote Desktop in a busy 2.4 GHz WIFI environment (Saturated EMF spectrum) with a cheap laptop. Feel like Microsoft Teams is running in the background… For those who are stuck with this apps at work, you know what I mean.
- The moment you hit A/T ARM on MCP: the trim wheel keep pitching all the way up, can’t bypass (same as the Grounded Boeing 738 max MCAS problem…).
- A lot of stutter even with a solid 30 FPS on final (Nvidia Surround 5760 x 1080 at 75hz monitors).
- GFIT barely have the autopilot authority, AOA with AP is very different.
- GoFlight LGTII Elevator trim wheel is not working.
- Few dead zones on the Mixture axis, at lean position, and near idle cutoff (Specially when the 2 radio’s are USB connected).
- With all those addons running, I saw an increased amount of upload data from Windows Defender SmartScreen, Microsoft EDGE and Microsoft EDGE update… Zendesk Tracking cookie from Logitech ? MSFS ? Lorby ? Goflight ? dxdiag ? MS compatibility Telemetry ? Nvidia’s backdoor hidden network connection ? Well, I’m Not a tracking cookie fan here. I like to read my news paper without someone behind my shoulder. MS people if it’s you guys, PLEASE, PLEASE STOP.
- The pc now behave like a server with multiple user connected in virtual machine…
- The next day, after a normal windows boot, all 3 screens where dimmed down (White is now yellow, except the mouse icon itself Full White) Some shade layers should not be running ? XBox Live ? Microsoft Store ? Steam ? MSFS2020 ? Few reboot did not fix the problem (sounds like a Spyware or malware stuck in the GPU process…)
- Format c: and reload the previous C: Image, back to normal.
Same thing the next day, Strange pc behavior. Windows System Restore did not fix the lag, or the strange startup configuration, only C: Image recovery did.
— >>> This PC was formatted and freshly installed the day of MSFS2020 release (BIOS Mode UEFI, Secure boot State ON, Intel Hyper-V Virtualization = DISABLED. it’s basically debloated, all Windows 10 default apps are uninstalled, No Skype, No MS Office, no Candy CRUSH, no Solitaire games, no background task running, on idle USER memory @ 150 MB with no network, 190 MB with network, 330 MB with all Logitech Drivers running in the background…
Hardware:
- Saitek Yoke
- Saitek X56 (Unplugged when it’s not VR in a Chopper)
- Saitek Quadrant extra
- Saitek Rudder
- G29 Wheel for Tiller (PMDG’s and Qualitywings 787)
- 2x Saitek Radios
- Goflight LGTII
- Goflight MCP Pro
- Triple 32’ screens setup with the dodgy Nvidia Surround (Far from the good old Matrox GXM TripleHead2go on 1 HDMI port)
- Asus Z270H MB
- Intel i7-7700K OC @ 4.66Mhz
- 32 GB RAM OC @ 3091 MHz single chanel (Dual CH Not compatible with 2 x M.2 NVMe)
- Nvidia 1080ti
2 Likes
2 Likes
With 180 Degres of max rotation, installed up-side down 
1 Like
If the Multipanel don*t show any number, it depends on the Windows USB Power Management. You should deactivate it for your saitek peripherals. The easiest way to do this, is spad.next. If you start spard.next as admin, it will fix this for you.
If you have problems with fps rates, it depends on a known issue in MFSM. All 3rd party apps, using the SimConnect Interface, have the same problem.
Azobo works on it and if they have fixed it, spad.next is a very good solution for the saikek problem.
I used spad.next with fsx and it works very well.
Scusi mi può spiegare come si fa?