SOH Community Project : DC-4 Skymaster native

Work In Progress …

Like the whole community, I really appreciated during its release the two addons B-24 and DC-4 that Flight Replicas had kindly allowed to be worn under MSFS. Unfortunately, I was a little disappointed by the absence of clickable areas in the DC-4’s VC and by the way the different variations had been transcribed.

All the attention of the Community having focused on the B-24, I decided with a small group of people on sim-outhouse (SOH) to take over the 3D models of Flight Replicas and make it a complete MSFS 2020 native version with a fully clickable VC and adding all the functions worthy of a study-type aircraft.
Of course in advance, the authorization of Mike “CYUL” was requested (Nov 7th, 2025) and it is with his full agreement that this project could begin.

This add-on want to provide a full native version of the Flight Replicas DC-4/C-54 aircraft originally designed for FSX/P3D, now compatible with MSFS 2020 and 2024. The conversion is conducted by me and the help of several people on SOH forum; you can follow this project progress here:

PS: In the presentation post on SOH, I made a mistake with Mike’s name which is not Pearson, sorry for this mistake :woozy_face:

The addon of Flight Replicas contained several different models but to avoid dispersing us at first, only the DC-4 Pax model with Air France colors will be treated.
The XML code that is already developed being studied in a modular way like the one used in the CANSO PBY, the addition of other variations will be quite possible, once this aircraft is at a sufficiently advanced stage, I will study these developments : C-54, R5D, Cargo, Firefither, 1009, DC-4E (if I find some documentation).

The project having started in mid-January, after a month of work I hav store a lot of official documentations and manuals on this aircraft (476 Mo).
Ttwo blender models (exterior and interior) were created from the MDL from the P3D v5 version. All the parts have been isolated and renamed as well as the animations to allow easier management of the 3D models, the unnecessary vertexes have been removed (25% gain on the number of vertices generated by ModelConverterX) what will allow to add additional details or animations.

For the exterior model, all the animations that existed have been recreated and others are in progress:

  • animation of airport services (stairs, ground power unit, refuelling), crew and passengers stairs are animated when the front and rear doors are open,
  • all the propellers have been redone in order to be able to visualize the pullthrough operations (propellers rotating at idle to circulate the oil in the lubrication circuits)
  • the feather function is operational and an animation visualizing the blur of the propellers in profile view has been added
  • the flames at the exhaust outlet (already integrated on the CANSO PBY) have been incorporated into the exterior model, the color of these flames varies depending on the power required from the engines and the mixture values (lean or rich).

For the interior model, the different bulks have been isolated and almost all the elements are already integrated. The bulk between the cockpit and the cabins that had been omitted by Mike on the P3D model was created according to plans and views from the DC-4 manuals.
Two LODs are currently used: one for views in the cockpit and one associated with external views
The animations of the various cockpit controls are carried out at 70%.
The end of the month will be reserved for the animations of all the instruments.

In parallel, the XML code based entirely on ModelBehavior is written progressively based on the knowledge of the CANSO PBY in order to move forward quickly and as efficiently as possible.

All this work has already made it possible to create a functional model that loads under FS20 and FS24 without any graphical bug. A “preliminary” version v0.03 has already been provided to two testers to validate these progress.

Screens under MSFS 2024:

Thanks to Mike for his agreement and to all the SOH participants who helped with this project!

I’m so glad to see the DC-4 getting this much attention! I too was bummed that the DC-4 was getting neglected. I’ll be keeping an eye on this!

This is great news. Was interesting reading through the SOH thread. Thank you for the hard work you’ve put in thus far.

I did notice the one user’s comment about MSFS 2020 and MSFS 2024 being split 50/50 usage-wise on Steam. This is a common misconception, as Asobo has clearly stated that MSFS 2024 overtook MSFS 2024 in early 2025, and I imagine the gap has only spread even wider since then.

So it is GREAT news based on your last SOH post that it seems that the conversion process to 2024-native should be fairly straightforward.

3D Modeling seems to be coming along quite well. What is the status on systems? Has any effort been put into those yet?

This project is certainly the most ambitious that I have accepted since PBY-5 (which is not yet finished and on which I still have ideas to concretize), this being said one thing after the other.
My idea on the DC-4 is to make it a plane closer to a study plane than a simple freeware, otherwise the one that existed could have been suitable. With all the documentation I was able to gather and the help of my tester friends on SOH, I think we can do something very good.

Happy to see that it’ll work in FS24 as well. Thanks for taking this on!

Watching this space. Thanks @LagaffeVFR5476

Update on Exterior and Interrior model:

  • Ground power unit and chocks appear on the ground and are automaticlly managed
  • Flames bigger (remark on SOH test)
  • Exhaust effects: smoke at startup and in function

  • Main commands are integrated and functionnal (animations + XML code)
    throttle, rpm prop levers, mixture, parking, flaps, cowl flaps, trimtabs …

Hi great work where i can take this aircraft?

If you have read this topic and the SOH one in reference, you will understand that is a Work In Progress.
The current revision provided to testers is v0.032 so it necessary to wait a little before a Beta or an Alpha version … I don’t work like Microprose :wink:

A screen taken yesterday, during a test after some modifications made on my development model …

Crew windows can be open/closed by click mouse:

Last improvments bringed to the Blender model:

Gust Lock implementation in Blender :

Holds hatches can me open/closed by click mouse.

Modifications for the Alpha v0.4.6 (April 03th 2026) :

  • Mesh of the cockpit bulk interior improved around the pilots windows
  • Windows mapping review (this should be reviewed when I begin the PBR textures)
  • Material “Windshield Dirty” (lighter crash) added and affected on the exterior windows (Crashs are lighter and some fingersprints appears but it’s very light)
  • Material Clear has been added in case of need
  • Selection of the Dirty/Clear windshield/windows with a click on Stitch character (upper right of the VC)
  • Gust Lock function added in the cockpit and coded (ailerons, elevator, flaps and rudder are locked with GustLock ON)
  • Improvement on the Radio cover (hide/display via a click on the aerator above)
  • Jumpseat for the Flight Engineer improved (right part which lock it on the spot behind the copilot)

Ice on the wings and the fuselage: work in progress on the engine parts: scale up + link to the engine cover for vibrations …

An other day working on the C-54 and its modern VC … with a real success :innocent: .

The “avionic” of the PBY has been “ported” to the C-54 and I was the first surprised to see that most instruments worked on the first try.
Two screens remained dark (transponder and auto-pilot gauge) but the buttons react correctly.

The issue is minor and must be at the level of the statement of $TEXTURES in the file panel.cfg or in the system.cfg, at the number of each electrical circuits that are not coordinated with the instruments: the system.cfg of the PBY is not identical line by line to that of the C-54, this point will need to be checked later.

This screen is under MSFS2020 but under 2024: it work also !

Vintage VC with a SPERRY functionnal:

After more than a week of searching, reading documentation on the Gyro Pilot Sperry, I begin to understand how it worked and by comparing the codes of Flight Replicas and planes on MSFS that have a SPERRY, I was able to arrive at a result that satisfies me.

Of course, everything is not perfect, there are still small things to check and improve but 80% of the functions on the Sperry are present and functional (AIL. button & ELE. button should be valided),

All I have to do now is finish the ATTITUDE gauge (XML encoding to finish) to get a vintage VC that’s good enough to be eligible for an open beta. (v0.5.0).

Here a screen on MSFS 2024 with the AUTOPILOT engaged as proven by the LED lit at the top left of the screen

I’m very grateful for all your hard work, Lagaffe. You are a tremendous contributor to this community, thank you.

Merci beaucoup Didier!

Are you still using the same external sounds that it had when it first dropped on fightsim.to? They were the best radial engine sounds I’ve heard on the sim. I would start it up, despite the barely functional cockpit, take off, get it stable, then switch to the external view just to glory in the sound of those radials.

Although I started working on this new project in January 2026, I think it’s only half or even 2/3 of its progress.
Migrating a 3D to a more advanced FS version, as far as I’m concerned, is not limited to using ModelConverterX (after agreement from the initial designer) to obtain 3D files and basic XML. For me, stopping at this stage is work that is not finished.

My goal is first :

  • to review the resulting Blender file in order to put it according to my development standards (revision of the tree structure in Blender,
  • renaming objects and animations to have something easily maintainable)
  • to improve the existing 3D if possible by adding more details and functionnalities,
  • then to migrate the XML code to the ModelBehavior standard (in order to release after a 2024 native version if possible),
  • then to review the textures to pass them into PBR and improve them.
  • the sounds stage is really the last one.

Initially, it was a question of building a DC-4, but over the days, they also decided to build a C-54, so two different aircraft (if only for the number of tanks, so for the FUEL SYSTEM and all the XML management). but also 2 virtual cockpit (modern and vintage with a functionnal Sperry), which increased the development times accordingly. These days, it would probably be a question of adding a firefighter version, which is possible since from the outset I thought of modularizing the project.

For now, I’m migrating the XML code. I listened to the sounds a bit and I think that even if they are very good, there is room for them to be greatly improved.

With the Stearmans, I worked modestly with the people at SimAccoustics and I realized that by working on this point a little, you can achieve very great results. I hope to be able to significantly improve this aspect, but it’s not for now.

Currently, I am trying to stabilize a working version that is “usable” (a WIP therefore not completed) in order to make future users wait. This will be a v0.5.0 WIP version.

The Beta version on which I work since many days is almost ready: it’s being tested with friends to validate the latest changes.

This version v0.51 will be released in this state: Work In Progress, that is to say that it is a project still under development but which in its current state allows you to get a fairly good idea of what the addon will be at termination.

A smart screen for my friend Jan with whom this project was decided and then launched last November and my thanks to Mike from Flight Replicas for his kind authorization, I hope this add-on will meet his expectations

Two pics under FS2024

Project progress point (beta v0.54)
Last week I focused on the lighting part inside the cockpit and also on the associated electrical part.
Both models have a “functional” internal lighting system, even though some things are not yet well controlled.

  • The “pilot light” switch that controls the lighting of the 3 red spotlights should work in theory, but the variable “LIGHT CABIN ON” does not seem to change of value correctly… it should be noted that under FS20, pressing the L key repeatedly turns these spots on … I still have a bit of work left to do on theses points
  • On the C-54, the GPS and other instruments turn on when the BATTERY switch is set to ON, whereas they should only turn ON when the AVIONICS switch is switched to ON …

Last news of this development:

C-54 has been improved and a lot of details bringed in the rear part of the fuselage:

Hydraulic management has been added and it is full fonctional :

  1. animation of some 3D gauges, XML code, levers, hand pump, shut-off valve,
  2. XML code to manage the hand pump and bypass handlet to increase hydraulic pressure (for engines OFF)

For example, wipers which are hydraulic can be used with engines OFF, using the hand pump to increase the pressure (2500 - 3000 psi) in order to have the power necessary.

Two new liveries for the R5D version are in the lest version :slight_smile:

From now on, I will start reviewing the interior textures that were still those of FSX/P3D to upgrade them for MSFS:

  • increasing details,
  • switching to PBR format for what is necessary,
  • improving mappings.

The last step will be to review the sound management for mixing a WWISE package and legacy sounds (inside the cockpit).

Since the last post, a new variation has been add to the package: a C-54S firefighter variation, which have its proper VC and exterior modifications on the fuselage.

All fuselages are reviewed and textured in 8K for more details (logo, repaints, etc).

The C-54E/S versions continue to be improved:

  • the cargo part of the C-54E reveals the aircraft structures, the emergency doors, and a crane at the rear door.
  • the cargo part of the C-54S - Firefighter is entirely covered with fabric to improve the thermal insulation of this area, and of course the crane is available at the rear.

  • the backup oil tank located in the C-54E/S fuselage (for long flights) is finished and textured.

Of course, all improvements are tested under FS20 & FS24 and currently this addon is compatible with the two opus of FS.

Now I will begin to updated all the objects in the VC in order to add PBR textures when it is necessary and providing a plus for the graphic rendering.
The last step willbe the sounds …

The step on the PBR conversion continue as you can see: the main flight commands are now converted.

And in the simulator 2024 the render is as attented :

The work is made under Blender 5.2.2 and the last Ucupaint version v2.4.9 to create the PBR set.