I don’t know what makes the ILS frequency pop-up as primary frequency for an approach. I would expect this to be part of the AIRAC, correlated with the specific approach, and not of the airport. The airport does have the ILS functional with the correct frequency.
An airport that has this particular problem is EHRD (runway 06 as well as 24) and that airport is part of the Benelux World Update, so I would expect it to be correct.
Is anybody else finding that the ILS no longer stays locked onto the GS with this new turbulence mod Asobo have introduced? I have not managed to do 1 approach since SU9 without a very large number of adjustments to keep the diamond in the middle of the altitude indicator. It used to lock on and adjustment was necessary for speed but the aircraft maintained its lock on the GS and pitched up and down accordingly. Now it seems to be virtually useless in terms of its ability to hold the glide slope automatically.
Yes, I ran into that last night. I thought it was a glitch, but with just 4mph wind, it was all over the place in the Baron. The turbulence is crazy now.
It is a setting when they make the AP. I know because there is a freeware AP that I use, and at first there was no ILS freq, but when I msgd the developer, he fixed it & stated that he accidently checked ‘delete ILS’ or something like that.
Its supposed to be thermals and updraughts added in SU9, personall i think they have over-egged it a fair bit now and its not realistic.
You can stop it by flying very early or turn the temperature down to prevent thermals, I did a 5am flight and it was indeed smoother - it’s just way too much I think.
I find the wind direction arrow in the G1000nxi PFD just spins about all over the place now - its useless as the numbers never settle, its more like flying into a 5kt crosswind at 90 degrees with a gusting 5kt wind from 270 degrees - totally unrealstic.
I am reliably informed by a real world pilot that the real G1000 has no problem holding a GS and can certainly cope with some wind and turbulence so the NXI G1000 system is obviously not quite right because its not coping with the new turbulence changes in SU9.
Yes true enough but since the NXI is supposed to be on its way to being the default by raising it here maybe at the very least the developer can talk to Asobo about finding out which it is with a view to whichever of the two systems is at fault being corrected.
Unfortunately virtually useless is not a particularly quantitative measurement. Do you have a video or can you describe how far (in terms of dots on the GS indicator) it goes off?
I can tell you this much, I just tried it twice on 2 separate approaches, restart between each.
With no wind layer, 29.92, clear sky, the wind indicator in the Baron G1000 Nxi was all over the place the entire flight and the plane bucked around, as if in a rodeo, and the airplane speed readings were bouncing around plus & minus about 10-15 KPH, from GL to 11,000. And on the approaches, it was so bad that the autopilot lost GS lock both times resulting in overshooting the GS until I intervened.
lol, I see what you mean. In terms of the dots on the indicator it will just move either upwards or downwards past the centreline about 2-3 lines and will keep going unless I manually make large adjustments to the RPM to arrest that change. It just doesnt retain the glide slope lock.
If you try an approach to EGPH Runway 23 during the day you should be able to replicate what I am seeing in the 172.
Yes, this exactly.
I understand they added thermals and updraughts but also think they have seriously overdone the effects, The wind indicator bouncing around like that makes it pointless as impossible to read any of the numbers or directions, I doubt very much that wind can behave like this.
Hello, I was planning a flight from LPLA to LPPI with the Cesnna Caravan and NXI. I had 2 enroute points : LM (vor) and SOLGI. I didn’t manage to put LM in my flight plan (the nxi only let me put LI which is in Germany…) even if I find this waypoint in the nearest vor and I can do a direct to. Is it a bug ? Thank you.
if I good remember is that problem with GS hold with app is quite long history problem. I remember it with def 1000/3000 equipments, mostly c172 and tbm/citat long so hard to say about nxi product problem. Yes, I needed do speed/rpm corrections to be ok with GS indicated.