Thank you using the Bug section, using templates provided will greatly help the team reproducing the issue and ease the process of fixing it.
Are you using Developer Mode or made changes in it?
No
Brief description of the issue:
If you choose a parking spot as a departure point at an airport and then change aircraft, the departure point will change to the default runway in the FROM section. You will still see the parking spot’s “node” filled-in in green even though the sim has changed the departure point to the default runway.
Detailed steps to reproduce the issue encountered:
Select an airport from the FROM box, when it zooms to detail, select a parking spot on the map and set as departure (note that it shows the parking spot as the departure point in the FROM section above), change aircraft, now note the departure point in the FROM section is the default runway, note the parking spot’s node is still illuminated in green and the description box is present for the parking spot, too. Click fly and find yourself on the default runway ready for take-off.
PC specs and peripheral set up:
Xbox Series X
Are you using DX11 or DX12?
N/A
Are you using DLSS?
N/A
For anyone who wants to contribute to this issue, Click on the button below to use this template:
Do you have the same issue if you follow the OP’s steps to reproduce it?
Provide extra information to complete the original description of the issue:
Are you using DX11 or DX12?
Are you using DLSS?
If relevant, provide additional screenshots/video:
This item has been reproduced and turned into an official bug report internally. This topic is now updated with the #bug-logged tag. From here, Asobo prioritizes the bug, works on a fix, and slates it for a future update.
This bug is seriously obnoxious and quite aggressive.
Basically, any change to your flight plane, aircraft, etc. will evoke it. What’s worse is the flight path will still visually show you departing from a parking spot and taxiing to the runway, when you’re actually going to end up departing from the runway.
If this isn’t fixed before the end of the beta, I have a feeling it’s going to raise the ire of all of us regularly. I can already predict all the times we forget it occurs and click fly only to have to quit back to the menu and start all over again.
Thank you using the Bug section, using templates provided will greatly help the team reproducing the issue and ease the process of fixing it.
Are you using Developer Mode or made changes in it?
no
Brief description of the issue:
After selecting a parking spot for spawning (departure), the selected parking spot is highlighted. If you change the aircraft after that, the parking spot is still highlighted. The aircraft does not spawn on this spot in cold&dark state though after clicking “Fly”, but with running engine on the runway.
Provide Screenshot(s)/video(s) of the issue encountered:
Detailed steps to reproduce the issue encountered:
see above
PC specs and peripheral set up:
Are you using DX11 or DX12?
DX12
Are you using DLSS?
no
For anyone who wants to contribute to this issue, Click on the button below to use this template:
Do you have the same issue if you follow the OP’s steps to reproduce it?
Provide extra information to complete the original description of the issue:
Are you using DX11 or DX12?
Are you using DLSS?
If relevant, provide additional screenshots/video:
Do you have the same issue if you follow the OP’s steps to reproduce it?
Yes, but in my case the problem also exist if I do not change aircraft after parking spot selection.
Provide extra information to complete the original description of the issue:
When selecting a parking spot to start a flight, it is suposed to start cold and dark, however since SU12 beta I am put on the runway fully setup regardless of starting at a parking spot or not. Most likley all airports with parking spots are affected.
following MODs are installed:
Mikeaat-Assetpack
Austrian Landmarkprojects
PG Innsbruck scenery
PG Linz (+Pöstlingberg) scenery
Project Lifts Europe
We love VFR region 1 and 2
Edit:
This was with TBM 930 and Cessna 208 at the new New Zealand Milford Sound Airport (NZMF, VR mode) and Latina Airport (LIRL, pancake mode)
Are you using DX11 or DX12?
DX11
Are you using DLSS?
no
If relevant, provide additional screenshots/video:
Do you have the same issue if you follow the OP’s steps to reproduce it?
Sometimes
Provide extra information to complete the original description of the issue:
I spawned a few times cold and dark without any problem. However, one time, I tried spawning at KSAN parking spot 18 with the Beechcraft Bonanza in live weather with all players. Instead, I was put on the active runway, 27, with engines running. Restarting the flight (i.e., hitting the Esc key and choosing the Restart option at the bottom) resulted in me still being on runway 27. Exiting out of the flight and re-spawning at that same position put me cold and dark exactly where I was supposed to be.
Are you using DX11 or DX12?
DX12
Are you using DLSS?
Yes
If relevant, provide additional screenshots/video:
Here are 3 times that I position my plane at the parking lot on the map then find my aircraft at the runway threshold simply by going to the command options to select a command profile adapted to the plane. I have not been able to reproduce this behavior on purpose.
Are you using Developer Mode or made changes in it?
No
Brief description of the issue:
A gate is selected in the menu, yet when loading in I’m placed on the runway or taxi and fully configured. Quit back out to main menu try again, loads me in correctly at the gate.
Provide Screenshot(s)/video(s) of the issue encountered:
Yup. I either mis click or just need to make sure after choosing a different plane to go back and select the gate I want. Easy thing to overlook or forget, just did it actually. But it’s all good.
Thank you using the Bug section, using templates provided will greatly help the team reproducing the issue and ease the process of fixing it.
Are you using Developer Mode or made changes in it?
no
Which aircraft are you using that experiences this issue?
any
Brief description of the issue:
If you choose a parking space and then change aircraft it shows you in your parking space but when you hit ready to fly in spawns you on a runway.
Provide Screenshot(s)/video(s) of the issue encountered:
Detailed steps to reproduce the issue encountered:
If you choose a parking space and then change aircraft it shows you in your parking space but when you hit ready to fly in spawns you on a runway.
PC specs and peripheral set up:
Are you using DX11 or DX12?
DX11
Are you using DLSS?
no
For anyone who wants to contribute to this issue, Click on the button below to use this template:
Do you have the same issue if you follow the OP’s steps to reproduce it?
Provide extra information to complete the original description of the issue:
Are you using DX11 or DX12?
Are you using DLSS?
If relevant, provide additional screenshots/video:
Thank you using the Bug section, using templates provided will greatly help the team reproducing the issue and ease the process of fixing it.
For anyone who wants to contribute to this issue, Click on the button below to use this template: