When I run the Working Title G1000, my bezels do not work. I have found that working knobs on the iPad through Spacedesk just doesn’t work well. It is the same on my GNS530 panel.
Ok, thanks!
I’m Seeing a couple of issues that have popped up in the last week or two with the Working Title G1000 enhancement. It is odd because I have not updated it since before Xmas and I thought it was working fine then. here is what I’m seeing so far.
On the Bonanza G36 with Mod without Air Manager.
- Heading Bug INC and DEC now move in 10 degree increments not 1 degree as they used to…
- FLC Nose Up and Dn now jump in 10 Knot increments, they used moved in 1 knot increments.
On the Stock C172 glass both controls work as they should with and without Air Manager.
Building it is not hard. It only works with air manager.
The instructions are here
http://siminnovations.com/wiki/index.php?title=Knobster_DIY
The encoder is here, Order it with the knobs
And print th case from Thingiverse
Yeah, it doesn’t work on my stock Skyhawks, I need to look for the reason
I just tested this with the 182 and the G1000 Mod and all the buttons and knobs worked fine. Not sure what I’m missing when you say this does not work with the mod. Can you give me an example?
When I run with the mod, I hear the clicks and see the animation but nothing gets triggered… None of the knobs or buttons trigger an action.
EDIT: using the air manager bezel
Not seeing that as all the buttons and knobs were doing what they should.
Is there something I can check to make sure the mod is running?
My setup above is using the WT G1000. My bezels work just fine.
I’ll agree that working the knobs from a touch screen is cumbersome. Not very smooth to say the least.
You can make SpaceDesk smoother by going into its settings on your tablet app, making sure it’s running at 60 fps and lowering the image quality and colour depth (it has minimal effect on visuals) to increase its responsiveness. But it’s still awkward to use knobs with a touch screen. That’s why the Knobster was created. And I want one. lol
That’s odd. I haven’t encountered this issue and the Bonanza is one of the planes I fly the most and I absolutely refuse to fly using the stock Garmin. I’ve been using the WT mods since they came out and haven’t looked back. Neither my Logitech panel nor Stream Deck show have that ±10 increments on those parameters.
Ok, good to know, I have some trouble shooting to do then… I’m glad it works since I prefer it.
Turns out I was using Working Title G1000 ver 0.3.3. I just updated to ver 0.3.4 and the problem is solved.
1 Like
Excellent. Glad you got it worked out.
Just a side note - you should take their G1000 0.4 beta and G3000 0.4 beta 2 they have over on their Discord for a test drive, if you haven’t already. Even though they’re feature incomplete atm (lacking some basic features found in 0.34 version) and a bit buggy, they’ve got some cool stuff and some placeholder pages and menus make me very excited for the future of the mods.
I thought you had a lead for me, I just remoted into my machine and I have 0.3.4 so I think some other program is interfering.
Well it’s sad its not working for you. I’ll test it here too later today and we can compare notes! If needed I will craft a solution! 
One hint for me is that I have to reboot after unloading WT to get my bezels working again, so it’s something that is loaded in my background.
[quote=“Crunchmeister71, post:193, topic:348509, full:true”]
Yep I will go take a look. So long as its a drop in replacement I will try it out. But I will follow their work and keep a lookut for impending changes that might be needed.
1 Like
Was that last logic.lua your most recent bezel update?
I’ve been playing around with the betas, and they work fine with the bezels. No weird stuff or anything. Just a ton of new functions that mirror the real world G1000 functions better. In actuality, I think they’re actually going for the G1000 NXi in terms of look and fee. They even have a placeholder under the PFD Syn Vis menu for “Pathways” aka “Highway in the Sky” which is a feature of the NXi.
I’m excited about the direction this mod team is going.
many thx
but its a standalone Version or i need more.
I want to take 2 ipad mini on the table and where i can stand the knobs?
many thx
Thats cool
but its a standalone Version or i need more.
I want to take 2 ipad mini on the table and where i can stand the knobs?